| Author |
 Topic  |
|
|
chumchum
Senior Member
1067 Posts |
 Posted - 09/10/2010 : 11:23:02 AM
|
Hi, Does anybody have a link where I can find the specs on the Remington AWR. Not the AWR II, that I can find on Remingtons website.
Thanks |
|
|
nononsense
Moderator
8673 Posts |
Posted - 09/10/2010 : 5:25:11 PM
|
chumchum,
You can probably put it together with this:
Remington Model 700 AWR 7mm Ultra
# Cal./Gauge: 7mm Remington Ultra Magnum
# Barrel(s): 26"
# Weight: 8 Lbs
# Sights/Scope: Drilled & Tapped
# Trigger(s): Model 40-X Adjustable Trigger Factory Tuned To 3 lbs.
# Stock: Bell & Carlson Composit Stock; Black Textured Synthetic Pistol Grip Stock w/ Cheek Piece
# Stock Dimensions: LOP 13 1/2"
# Fore End: Black Textured Synthetic Fore End
# Butt/Pad: Black Solid Rubber Recoil Pad
# Metal Condition: New
# Bore Condition: New
# Manufacture Date: New Gun~2007/2008
# Extras: New In Box w/ Papers
This Remington Model 700 AWR (Alaskan Wilderness Rifle) is chambered for Remington's 7mm Ultra Magnum carriage. This rifle has a 26 inch blued barrel stamped "Remington Custom Shop" with a recessed crown, jeweled bolt, two position safety, and three round internal box magazine. Gun has a black textured synthetic stock from Bell & Carlson with Remington "Limb-Saver" recoil pad and sling studs. This is a NEW gun and comes complete with box and papers.
# Remington Model 700 (AWR) Alaskan Wilderness Rifle
# Model: 700 Alaskan Wilderness
# Manufacturer Number: 6050
# Action: Bolt
# Caliber: 338 Remington Ultra Magnum
# Capacity: 3
# Barrel: 26 Inch
# Trigger: Single Stage
# Safety: Two Position
# Length: 46 1/2 Inch
# Weight:7 Pound
# Stock: Black Fiberglass
# Finish: Matte Black
Best.
|
 |
 |
|
|
chumchum
Senior Member
1067 Posts |
Posted - 09/10/2010 : 5:36:11 PM
|
| Thanks, I was trying to figure out what the finish was and if the barrel and action were stainless. The finish is like a blued not matte, but it's not blued. It's some kind of rust resistant finish. Thanks for the info. |
|
|
|
nononsense
Moderator
8673 Posts |
Posted - 09/10/2010 : 6:08:07 PM
|
chumchum,
Metal Finish: Non-reflective, black matte, TeflonŽ coating.
These are the original specs as noted:
SPECIFICATIONS Model: Remington 700 AWR, Condition: NWB retail display, Serial#: S6520388, Caliber: 300 Rem Ultra Mag, Stock: Aramid fiber reinforced fiberglass; straight comb with integral cheekpiece; black textured finish; 1" black recoil pad; sling swivel studs. Length of Pull: 13-1/2", Metal Finish: Non-reflective, black matte, TeflonŽ coating. Receiver: 416 stainless steel; drilled and tapped for scope mounts; Barreled action hand-fitted and epoxy-bedded to stock. Magazine Cap.: 3-shot blind magazine, Barrel: 26" 416 stainless steel with TeflonŽ coating; clean barrel without sights, 1-in-10" rifling. Muzzle Diameter (Nominal): 0.65", Operation: bolt action- jeweled finish, Overall Length: 46-1/2" for Ultra Mag. Weight: 7 lbs., Optical Sight: none. Drilled & tapped for scope mounts Case: Remington lockable green plastic case. Note: The photo is for reference only and not of the actual item.
REMINGTON CUSTOM SHOP Accuracy is a hallmark of every RemingtonŽ firearm, but there is a level of precision attainable only through personal attention. That becomes strikingly clear the first time you print a group with a rifle from our Custom Shop, thanks in part to a small group of highly skilled technicians and gunsmiths with vested interest in every gun produced. They employ the most advanced gunmaking equipment, vice-tight tolerances and stringent quality standards to Engineer Performance. If you strive for the next level of accuracy and performance, Remington Custom Shop. Engineered Performance.
ALASKAN WILDERNESS RIFLE A highly practical big-game rifle, the (AWR I) is custom-designed for the roughest weather and toughest hunting conditions. It combines hard-use durability, permanent stability, greater corrosion resistance, and the Model 700's accuracy. These rifles can take up to 8 months to order, but we have one in stock!
The Model 700 AWR starts with the world's strongest bolt action design. Unlike Mauser-type bolt actions, there's no ejector cut to weaken the bolt. And our extractor assembly cannot override the cartridge and jam. Instead, all Model 700 rifles feature a bolt mechanism that's stronger by design and making it grip the cartridge head tighter as pressure increases. The bolt, barrel, and receiver surround the cartridge with three rings of solid steel for maximum strength.
Each barreled action begins with a 416 stainless steel bolt, barrel, and receiver, which is hand-fitted and epoxy bedded to a lightweight, matte black composite stock with a blind magazine. A non-glare, black matte TeflonŽ coating that won't reflect light covers all exposed metal surfaces. The comb is straight with raised cheekpiece, and the butt carries a magnum-grade 1" black rubber recoil pad. The barrel contour is a special, 26" Custom Shop magnum profile that's high on accuracy and low on weight. Each trigger mechanism is hand assembled and tested. Weighing in at 7 pounds, the Model 700 AWR is perfect for hiking the high country or all-day stalking.
Best.
|
|
|
|
|
chumchum
Senior Member
1067 Posts |
Posted - 09/10/2010 : 6:54:10 PM
|
| THANKS exactly what I was looking for!!!!!! |
|
|
| |
Topic |
|
|
|
Remington 700 AWR specs.
