GunBroker.com Message Forums
Review our Posting Guidelines
GunBroker.com Message Forums
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?   Trouble / Can't log in?

 All Forums
 GunBroker.com Message Forums
 Competition Shooting and Reloading
 Accurate 44 Mag Rifle Load
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

buddyb
Advanced Member

2963 Posts

Posted - 11/06/2017 :  10:24:16 PM  Show Profile  Reply with Quote
Finally bought a Ruger77/44.Been wanting a Ruger 44 mag rifle for many years.Found my favorite 250gr SWC GC bullet will not feed from the mag.310 gr Lee cast does fine and I have a box of Hornady 240 XTP bullets.Any suggestions on a good 44 mag rifle load?

Mobuck
Advanced Member

10160 Posts

Posted - 11/07/2017 :  06:51:02 AM  Show Profile  Reply with Quote
A powder with a relatively "slow" burn rate. I don't think you'll "overdrive" the 240 XTP from a 44 mag case. Son used that bullet in a sabot from his .50 ML reaching around 2000fps w/o having bullet performance issues.

Mobuck<BR>
Go to Top of Page

charliemeyer007
Advanced Member

USA
5335 Posts

Posted - 11/08/2017 :  12:13:01 AM  Show Profile  Reply with Quote
My 94AE will feed the Lyman 429421 without issues if cycled slowly. I bought a RN 240 gr SAECO that works great no matter what and it will hold one more round in the magazine.

My favorite was 5744 in my 29's until they changed it to short cut. I switched to BlueDot and have been happy.
Go to Top of Page

B17-P51
Senior Member

Vatican City
1717 Posts

Posted - 11/08/2017 :  12:13:21 AM  Show Profile  Reply with Quote
Hornady 240 gr XTP, 22gr 2400, magnum primer, heavy roll crimp at cannelure. Used many years in a Marlin 1894 with good results. Also used in Ruger Redhawk for hunting.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
GunBroker.com Message Forums © 1999-2017 GB Investments, Inc. All Rights Reserved Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06


Visit GunBroker.com at: www.gunbroker.com
Use of this Web site constitutes acceptance of the site's User Agreement
Site Map