.

Remington 742

burnrmanburnrman Member Posts: 2 ✭✭
edited June 2005 in General Discussion
How does the bolt come out of a Woodmaster 742??[?]

Comments

  • buddybbuddyb Member Posts: 3,857 ✭✭✭
    edited November -1
    You need to get a Sporting Rifle take down manual by J.B.Wood.It is more involved than most of us can explain on line.
  • nunnnunn Forums Admins, Member, Moderator Posts: 35,110 ******
    edited November -1
    It has been my experience that the typical 742 shooter shoots it until it jams up or breaks and then takes it to a gun show and trades or sells it. Been burned by several, won't buy anymore.

    FFL Dealer/Full time Peace Officer, Moderator of General Discussion Board on Gunbroker. Visit www.gunbroker.com the best gun auction site on the Net! Email [email protected]
  • MIKE WISKEYMIKE WISKEY Member Posts: 9,297 ✭✭✭
    edited November -1
    YOU HAVE TO REMOVE THE BARREL (LARGE NUT UNDER THE FOREND), AND THE OPERATING HANDLE (SMALL PIN, FROM THE TOP DOWN). BEST LEFT TO A GUNSMITH.
  • danski26danski26 Member Posts: 284 ✭✭✭
    edited November -1
    When you take that pin out be very careful you don't loose it. it's tiny and has a liking to jump to dark corners of your shop. Brownells has replacements. You also need a special wrench to take off that barell nut. Or if your careful you can get it with a vice grip or channel lock pliers. I always chew it up though, along with the action bars next to it.

    danski
Sign In or Register to comment.