In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

Forgemonkey

woodshed87woodshed87 Member Posts: 25,785
edited June 2013 in General Discussion
Did You get that Turkey Mount back Yet??
Woody
· Share on FacebookShare on Twitter
«1

Comments

  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    My apologies for peeing on your "flyover" thread.

    They truly are impressive and it was nice of those guys to take their own time and money to do that for the crowd.

    I just disagree with the guy that brought patriotism to the table.
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    The CD arrived, but I have only had time to watch the first part so far.

    Those pilots are GOOD!

    Anyone in particular you want to get it next?
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Send me an email.
    You won the gunvault micro deluxe 12k post consolation giveaway.

    Promise. You'll have a use for it. Email me your shipping address.

    Or if you'd like to have it shipped somewhere else. Let me know.
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Email sent.




    Mule
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    What product could I use to stain SS black?
    Not a big job just some small bolts. Also, is there anything that will stain aluminum black?
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Your brass Has Been Confiscated by the Biotch @ The Post office
    She Saw me put Empty Casings in the Box And All then After I paid She Said I need to Check And See if they Ok to Ship I Assured her it Was Ok As they were Harmless as A Sink Faucet,,,, Oh No they Are Here til I hear back From Syracuse Headquarters.
    I AM SO PISSED Right Now Where Do they Find these People
    Her Website Says No Brass That is Primed
    Does Not Say unprimed Is OK So That Confused Her

    I AM SO PISSED Right Now Where Do they Find these People
    Woody
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    did not mean to ruin your thread by my knucklehead misunderstanding i apologise


    serious question, looking at the web site, watching the vids to see how this thing works, it shows manually lowering the hammer, then engaging the thumb safety


    what happens if you just flip up the thumb safety, i am comparing it to say a beretta decocking safety or likewise systems
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    How are you feeling, my friend?
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Mr. Monkey Sir,
    Have you done any finish work and/or tuning on any Stainless, Colt Defenders?
    If you have would you mind posting some pictures of them?

    Mercy bucket (that there's french talk). [:D]
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    hows the weather in your neck of the woods,made a trip to Rifle yesterday and was snowed on all the way from Red Mesa to Pieance Creek.Did the package arrive yet?
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    BA5qHD2l.jpg

    That's an awfully BEAUTIFUL knife!
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Send me your address.

    I have a small gift for you.
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    While we were in St. Augustine last weekend I took a picture of a chain that they had in the 1800's that was stretched across the bay and pulled tight when enemy ship's came into the harbor to put holes in the ships and sink them. Have you ever seen chain like this? They said a blacksmith made it back in the 1800's. Is or was that possible back then?

    100_2175_zps72c1b872.jpg

    100_2174_zps127fc68a.jpg
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    You ever listen to Scottie in the mornings on 94-Kix?

    I just met him last weekend.

    Seems like a nice guy.
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Forge, finally got to the range today...I did clean up the guide rod a bit with a Drexel tool but the 18lb spring definitely did the trick! No new burrs or anything like that. Thanks for the help and to the others with the diagnosis. :)
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Thanks for what you did and am i supposed to send ruger 41 a copy of my drivers license? Thanks David
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    I don't mean to be a PIA, but would you please enter that "son" you are mentoring, into the GB kids Christmas giveaway.[;)] We would be honored to have him among our family.[^] Oakie
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    How much would you want the Miller for?
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Ya ever make any tomahawk heads?
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    I didn?t want to interfere with the other thread but I have a couple of questions. If I was to order a 1911 from you custom made. Who do you stamp as the maker, forgemonkey or something else? How long is a normal build time from receiving the order?
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Hey Forge you Ok Up there Where Yer At???
    Woody[;)]
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Hey Bill,
    Do you know if they catch many Lake trout (Macks) through the ice on Blue Mesa reservoir during the winter, if so, any size to them?





    Mule
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Bill,
    Might want to have a look in your junk mail again.




    Mule
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Thanks for the pics of the lock in the model 60 thread. I only have 1 with a lock and never use it, and never realized that it had a visible tab.
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Are you home today? I would like to visit after 11.

    MBK
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    I'd like your thoughts on this.
    http://forums.GunBroker.com/topic.asp?TOPIC_ID=608591
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    I finally bought my 1911. Colt Gold Cup, National Match. Series 70.

    One of the good old ones. Yep, pretty expensive. I've only shot about 200 rounds, but it hasn't missed a lick yet.
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Thought you would appreciate some of this guys work

    Tom Hill Sculpture using only recycled horse shoes

    tomhill-sculpture.jpg

    tom-hill-horseshoe-stag.jpg

    he has lots if you google him up
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Did Ya Bring Him Home[:D]
    Woody
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    I was noting one of your posts on another thread, and was reminded by all the commas that, I believe, you said you use those to help with dyslexia. Was wondering if dyslexia ever poses a challenge for you in areas other than the written word, such as metal working?

    btt
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    I just now found the thread on donkeys and mules. I have heard some "Jake Clark" and Carl Jones stories. As I am sure you know, some seem unbelievable. I am also sure those stories were for the most part factual. While I personally can't deal with mules, I am always in awe of their athleticism and intelligence. My son worked up there for a while and guided for Jake one fall. He is a cow cop in G. Junction now. Maybe you will run into each other.
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Now that zink has posted the pic, you can edit the original post to add the following and the pic will show up in your post.

    (Just replace the beginning and the end with brackets.)

    {img]http://i30.tinypic.com/24o4sx5.jpg[/img}
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    The black powder pistol is one of my favorites because i got that when i was at the lowest i have ever been. I will never get rid of that gun because it reminds me of what i can go through if i need to. Thanks again for present and the memory. Some things you can not put a price on.[:)] I really wish other people could get a grip on their life. Lifes to short to be so negative. I get down but mostly after hurting so bad for a few days. Then something will happen and pick me right back up.
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    That did the job, got it all back together. Thanks for the consult!
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    I just got a phishing e-mail from your GunBroker e-mail account. You might want to change your password.
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    You seem to be in the know as too these things. Are circular saw blades any good for making into knife blades? I have quite a few- some pretty thick and pretty old, ie., 1950's.
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Didn't know if the GB email system is working or not...

    What do you think of Republic Forge 1911s? On par with Nighthawk? WC?
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Your 45LC post reminded me of it.

    I might have read about it. But I honestly can't remember.

    What became of that .45ACP shoot off you did loading birdshot??



    I might have read and commented on it in an earlier post. But i have no recollection.
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Did you ever learn where not to put your hand and get that boil cleared up [?][?][?][?][}:)][;)]
    · Share on FacebookShare on Twitter
  • Options
    woodshed87woodshed87 Member Posts: 25,785
    edited November -1
    Bill,
    Sent you an email.




    Mule
    · Share on FacebookShare on Twitter
Sign In or Register to comment.