In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

Savage 99 question

toad67toad67 Member Posts: 13,019 ✭✭✭✭
edited February 2012 in Ask the Experts
I recently bought a Savage 99 on GunBroker. I believe the stock has been replaced (definitely refinished) and am unsure of the model. The forend is schnobel-type with no markings. The buttstock has checkering on the pistol grip area with 2 diamonds in it. This doesn't appear to be original as the lever boss markings indicate 1954 (S/N 750XXX). The rifle is a 24" barrel in .300 Savage.

What should the original stock look like and where did my current stock come from? Also, how do I tell if I have an EG or R?
· Share on FacebookShare on Twitter

Comments

  • Options
    toad67toad67 Member Posts: 13,019 ✭✭✭✭
    edited November -1
    I have a '99 in .308. When I shoot military 7.62 Nato, extraction is very difficult. This does not happen when using commercial .308. Any Ideas? Thanks to all. Bob
    · Share on FacebookShare on Twitter
  • Options
    toad67toad67 Member Posts: 13,019 ✭✭✭✭
    edited November -1
    http://www.gunbroker.com/Auction/ViewItem.aspx?Item=275030005

    I am not that familiar with Savage guns. Can someone explain the lever safety this gentleman is talking about? Sorry for the dumb question. Thanks in advance.

    Todd
    · Share on FacebookShare on Twitter
  • Options
    toad67toad67 Member Posts: 13,019 ✭✭✭✭
    edited November -1
    A friend of mine brought his grandpaws Savage model 99 over for show and tell, and neither one of us could find the serial no. on it. I would assume it would be on the belly foreward of the lever, but it's not. Would this be on the tang, under the butstock, or were they un-numbered at one time or another. P.S. This is marked "savage model 99" only (.300 Savage) Thanks, old ford truck fan.
    · Share on FacebookShare on Twitter
  • Options
    toad67toad67 Member Posts: 13,019 ✭✭✭✭
    edited November -1
    From what research I've done, I think this 99 was built in 1937. Am I right? Is it a 99B? The rifling is strong and bright, what is this rifle worth, where would you start it for auction? Serial #365158 and the barrel si 24". Are the sights correct?
    IMGP4850.JPG
    IMGP4852.JPG
    IMGP4848.JPG
    IMGP4857.JPG
    IMGP4859.JPG
    IMGP4876.JPG
    All the numbers match, stock, butt plate and forarm.
    Thanks for the help.
    W.D.
    Fixed the pictures.[:D]
    · Share on FacebookShare on Twitter
  • Options
    toad67toad67 Member Posts: 13,019 ✭✭✭✭
    edited November -1
    A buddy of mine has a Savage 99 that he inherited. According to the serial number it was built in '54 and it doesn't look like it's been thoroughly cleaned since '58! The gun shoots real good and holds 1.25 inch groups at 100 yards but the magazine is sticky and doesn't easily accept shells or feed them. What is the best way to clean the mechanism out short of a complete disassembly? Can we spray some brake cleaner in there and wash the gunk out or do we need to tear it down?
    · Share on FacebookShare on Twitter
  • Options
    toad67toad67 Member Posts: 13,019 ✭✭✭✭
    edited November -1
    Does anyone know if a Savage 99 410 barrel will fit on just about any 99? I have an early 99 30-30 takedown and thought the 410 barrel would be nice if it was an easy switch.
    Thanks in advance,
    Ed
    · Share on FacebookShare on Twitter
  • Options
    Riomouse911Riomouse911 Member Posts: 3,492 ✭✭✭
    edited November -1
    Some production Savage 99's had a small lever that was moved forward to lock the lever, located on the right side of the action. Later models don't have this. I had a 99f in .308 that had the lever...if you look closely at picture #19, where the action bar enters the bottom of the action, the small lever is seen.
    · Share on FacebookShare on Twitter
  • Options
    toad67toad67 Member Posts: 13,019 ✭✭✭✭
    edited November -1
    I kept looking on the lever but now I see it just behind the trigger. Thanks Rio..quote:Originally posted by Riomouse911
    Some production Savage 99's had a small lever that was moved forward to lock the lever, located on the right side of the action. Later models don't have this. I had a 99f in .308 that had the lever...if you look closely at picture #19, where the action bar enters the bottom of the action, the small lever is seen.
    · Share on FacebookShare on Twitter
  • Options
    navc130navc130 Member Posts: 1,202 ✭✭✭
    edited November -1
    Picture #35 shows the safety lever. It is pushed forward to block the trigger (the internal safety) and also locks the lever closed.
    It was the standard safety for many years.
    · Share on FacebookShare on Twitter
  • Options
    toad67toad67 Member Posts: 13,019 ✭✭✭✭
    edited November -1
    Thanks guys! Pretty cool old rifle none the less.[:)]
    · Share on FacebookShare on Twitter
Sign In or Register to comment.