In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

Help with Model 70 Beretta

joealeman012joealeman012 Member Posts: 2 ✭✭
edited July 2010 in Ask the Experts
I bought a model 70 .32 beretta for only 80 bucks but it is missing the firing in, firing pin sring, recoil sring, recoil guide, and the magazine. I have purchased all of the parts over the internet and was now wondering how do i take out the old firing pin to put in the new one??? If anyone can help me that would really be great
· Share on FacebookShare on Twitter

Comments

  • Options
    rufe-snowrufe-snow Member Posts: 18,650 ✭✭✭
    edited November -1
    I dug up a IPB that I had. It shows just one pin that goes down through the top of the slide. It secures both the firing pin and the extractor.

    Your going to need a small diameter pin punch. Carefully drive the pin out from the bottom of the slide, toward the top. It appears that a protrusion on the base of the extractor acts as the firing pin retainer.

    Beretta made both rimfire and center fire Model 70's. Chances are that they used different firing pins.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.