In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

94 357 cartridge block

rlamk4rlamk4 Member Posts: 128 ✭✭
edited May 2015 in Ask the Experts
Can someone explain where the cartridge block is installed and does the 357 use a different mag tube?

Comments

  • charliemeyer007charliemeyer007 Member Posts: 7,346 ✭✭✭
    edited November -1
    http://www.midwestgunworks.com/page/mgwi/*/W94MZT


    cut and pasted
    2. The second reason only applies to the 357. The top end of the finger lever is fitted with a small piece of bent spring steel secured with a screw. Winchester call it the "cartridge block". This catches the rounds as they come back out of the mag tube & holds them in the right position for the action to lift & chamber them. The problem is this little part isn't up to the job and regularly breaks along one of its corners.
  • rlamk4rlamk4 Member Posts: 128 ✭✭
    edited November -1
    Gun has serial above 6 million. I have the parts to install but don't see a provision for the screw. Don't see installation on any schematic. Someone have a picture of installation? Thanks.
  • dcs shootersdcs shooters Member Posts: 10,969
    edited November -1
    See if this helps.............

    www.levergunscommunity.com > ... > General Discussion
    Type in what you want to see, might have to join [;)]

    I googled what you are looking for got a list with this web site.
Sign In or Register to comment.