In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

PROBLEMS WITH MY MEC SHOT BAR.

shoot_the_doeshoot_the_doe Member Posts: 51 ✭✭
edited July 2003 in Ask the Experts
I have a used mec I recently purchased and it has a 7/8 oz. shot bad and for some reason either the wad isnt going down far enough or the bar is putting to mush shot in. Any suggestions?

shoot don't wait

Comments

  • claysclays Member Posts: 1,913 ✭✭✭✭
    edited November -1
    Lots of variables here, first which type of hulls are you loading. Next are your wads matched for the 7/8 load to that specific hull, also have you checked to insure that you are using the correct size powder bushing. If after insureing all of these are correct, check your wad pressure to make sure it is forcing the wad all the way down on the powder load.
  • shoot_the_doeshoot_the_doe Member Posts: 51 ✭✭
    edited November -1
    AA hulls AA wads 7/8-1 1/4 they are good for I will check the pressure thanks.

    shoot don't wait
Sign In or Register to comment.