In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
1907 wsl magazine problem
wild bunch guy
Member Posts: 142 ✭✭✭
the magazine will not stay in gun, upon firing it comes out about 1/2" then it will not cycle the next round into the chamber.it does it with a full(10 rounds)mag. or anytime up to the last round. Magazine catch is engaging the mag. correctly and it does not look like it was messed with. I have tried max loads, 19 grs IMR 4227 & 180 gr. bullet down to 17 gr & 180 gr. bullit. any ideas? PS It is a orig. factory 10 rd mag.Thanks in advance
WBG
WBG
Comments
the magazine will not stay in gun, upon firing it comes out about 1/2" then it will not cycle the next round into the chamber.it does it with a full(10 rounds)mag. or anytime up to the last round. Magazine catch is engaging the mag. correctly and it does not look like it was messed with. I have tried max loads, 19 grs IMR 4227 & 180 gr. bullet down to 17 gr & 180 gr. bullit. any ideas? PS It is a orig. factory 10 rd mag.Thanks in advance
WBG
Do you have another magazine to check the rifle with? I would tend to suspect the magazine itself.
Also, you might be interested in this forum: some folks knowledgeable about 07's hang around there.
http://vintagesemiautorifle.proboards105.com/index.cgi?board=win07
Thanks for the web address, I'll check them out
WBG