In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Remington rolling block

hunter.bhunter.b Member Posts: 223 ✭✭
edited March 2016 in Ask the Experts
I have acquired an Old Remington Rolling block action from an estate sale. I have two questions: what is something like this worth ( not that great of condition, but can be worked on by a gunsmith ), and since it has a serial# am I able to ship to someones home address or does it need to be shipped to a FFL dealer?
Thank You

Comments

  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    This gun takes a 2and half in shell. Would gun shoot brass 16 ga.ond/or20 ga. paper Thanks John
  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    Anyone know what this is? The only marking I can find on it ANYWHERE is the Reimngton stamp and the ever so faint serial number on the bottom of the barrel. I have no clue as to what model. I figure it's a .22 just by looking. I can research the rest if I just knew what model. Im going to sell it on GB but need to know:

    What it is:
    When it was made:

    Thanks!
    P1010001.jpg
    P1010002.jpg
    P1010003.jpg
    P1010004.jpg
    P1010005.jpg
    P1010006.jpg
    P1010007.jpg
    P1010008.jpg
    P1010009.jpg
    P1010010.jpg
    P1010011.jpg
    P1010012.jpg
    P1010013.jpg
    P1010015.jpg
    P1010017.jpg
  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    Okay here goes. My friend finally got his receivers in. He bought 100 M1867 Swedish Actions. At $14 a piece, we figured why buy two when you can buy 100 and build some to sell. In the next couple years, I'm going to build some pretty nice Rolling Blocks, no two will be alike. Give me some ideas for what to do, you might even see it listed on here some day.
  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    I have a Reming Rolling Block 7mm.The rifleing is bad.Would it be possible to rechamber and new rifling for 30:06 ?
  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    I am looking at a Remington Rolling Block in 7x57 as a platform for a 219 Donaldson Wasp. Will it handle it OK?
  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    I have a Remington rolling block shotgun that is in horrible condition.Can I put a rifle barrel in it?
  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    Found a Remington I have never seen and not in Norm Fladerman's book.Small frame big bore, round barrel two band.26 1/2" barrel and total length is 42 1/2".Has a perch belly stock but not receiver.On the bottom left side of the receiver it has Pat May3d, Nov.15th 1864,April,????, 1866.In one line.What is it?Very small gun but big bore. Thanks, Hunter
  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    In 1980 my parents bought a house from the man who had it built...he was our local FBI agent. The following year my parents began adding a wing onto the house. One on the hvqc men called my mother downstairs. He had just taken the end off of the original air ducts and found a rifle inside it.

    The gun was covered in a light surface rust. I took it home and cleaned on it for a few days and was suprised on how tight and smooth the hammer and trigger were. But it looked very old.

    It has a Republic of Mexico seal on top of the reciever. Being unfamiliar with these types of rifles I called Remington...and, after several days of calling I finally got hold of their rifle historian. She asked lots of questions about markings and such and told me that it was a Type 1 rolling block, sn 2777, 1870's vintage. It had a 7mm barrel on it to which she said it had been rebarreled in the late 1890's (probably) to fire the newer and more powerful smokeless powder
    rounds.

    Are these guns worth anything?
  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    I have a Remington rolling block action and was wondering how to tell if it is a #1 or #2 action? Thanks for any help.
  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    No info last time I asked this question so will try again. What is the way to tell if I have a #1 or #2 Remington rolling block action? I would send pic's but I don't have the capability to do so. Thanks in advance for any help.
  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    Can anyone help me ID this? Looking at comps other models have the actual model imprinted on it but I can't really find any markings on this besides what I assume to be the serial number underneath the barrel. Thanks!

    P1010001.jpg
    P1010003.jpg
    P1010004.jpg
    P1010006.jpg
    P1010007.jpg
    P1010008.jpg
    P1010009.jpg
    P1010018.jpg
    P1010019.jpg
    P1010020.jpg
    P1010021.jpg
    P1010022.jpg
    P1010023.jpg
    P1010024.jpg
  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    Have one chambered for 12.7x42mm .Don't understand how it would work in a rolling block.Wonder if it was ever a rimmed round?
  • hunter.bhunter.b Member Posts: 223 ✭✭
    edited November -1
    Hello again folks.Can anyone help me out on a Remington Rolling Block rifle value. I saw one for sale in very nice shape but just dont know what to pay.Any ballpark figures would help. All I know is it has the saddle ring if that means anything. Appreciate any help. Richee
  • MIKE WISKEYMIKE WISKEY Member, Moderator Posts: 9,961 ******
    edited November -1
    YES, BUT......WOULD IT BE WORTH IT? REM.MADE 20 GA. SHOTGUNS USING THE #1 ACTION. ANY BARREL YOU PUT ON IT WOULD HAVE TO BE CUSTOM MADE.
  • charliemeyer007charliemeyer007 Member Posts: 6,579 ✭✭✭
    edited November -1
    If only the barrel is bad it might be reasonable. Your horrible description is exactly that.

    Maybe just a liner to 28 ga, 410 bore or a smooth bore 45-70. You can get upwards of an ounce of shot in a 45-70

    cut and pasted from a 2003

    There isn't a lot written on rolling blocks, in Flayderman's Guide To Antique American Firearms, the shotguns were made from about 1870's to 1880's, Model No.1 : 16 gauge chambered for interchangeable 16 Brass or 20 gauge paper shells with shotgun butt plate. The Model No.2 was a 20 gauge still chambered for the same 16 Brass or 20 paper, but most of the parts on the No.2 were made for military rifle gun parts, barrels and military butt plates. The barrels were 30 to 32 inches long.
    Values range from about $250.00 for very good to $600.00 for Exc. condition. Hope that helps good luck with the gun.
  • v35v35 Member Posts: 12,710 ✭✭✭
    edited November -1
    Check Numrich/Gun Parts.
    They used to make barrels.
    I believe 45-70 would work.
    What number rolling block is it?
Sign In or Register to comment.