In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

AK furniture removal ?

rambo rebelrambo rebel Member Posts: 4,028
edited October 2001 in Ask the Experts
I have a sar-3 that I wish to change to another stock set and I don't know how. I tried to remove the butt stock by taking the top screw out and I couldn't get it to budge.Is there any where that I can go on the web to get ILLUSTRATED instructions on how to do this without destroying the wood. thanks - V
· Share on FacebookShare on Twitter

Comments

  • PhilPhil Member Posts: 47 ✭✭
    edited November -1
    Take the top cover off-push in the gizmo at the back of the receiver and pull it up and back-there's another screw for the buttstock under it.You'll have to take the recoil assy.out to get to the screw-it's easy,just push it forward and pull it up and gently let the pressure off.To remove the upper hand guard,look on the right side of the rear sight block-you'll see a lever.Rotate it up 2 clicks,till it's pointing straight up,lift the back of the handguard,and pull it back and off of the gas tube.To remove the lower handguard,look at the front,right,upper side of the guard-next to the barrel-you'll see a little lever.Rotate it up(you might have to give it a little tap to get it started)and forward,pull down on the back of the handguard.Bing,bang,boom...hope that helps you.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.