In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Question for Stevens Shotgun Experts

NRA1NRA1 Member Posts: 27 ✭✭
edited February 2009 in Ask the Experts
I have a Stevens Model 54 Bolt-Action .410. I need a bolt. Do I have to find another Model 54 bolt or will any other Stevens .410 bolt fit? If other Stevens .410 bolts will fit, then which models are compatable? Thank You in advance.
· Share on FacebookShare on Twitter

Comments

  • Emmett DunhamEmmett Dunham Member Posts: 1,418 ✭✭✭✭✭
    edited November -1
    I use Numrich to find the right part swap by looking at the part number for one weapon, go to another weapon and check the number on the part there, if they are the same number then they should swap back and forth.


    Emmett
    · Share on FacebookShare on Twitter
  • 41 nut41 nut Member Posts: 3,016
    edited November -1
    Never just swap a bolt from one gun to another gun without having the headspace checked and properly adjusted. To do so could cause a very dangerous situation resulting in the blowing up of the gun and probability of injuring the shooter. All bolts must be individually fitted to the receiver/barrel in order to have the correct headspace and be safe to fire!
    · Share on FacebookShare on Twitter
  • NRA1NRA1 Member Posts: 27 ✭✭
    edited November -1
    Good idea Emmett. I'll look at Numrich and find my answer. Thanks a bunch!!
    · Share on FacebookShare on Twitter
  • Emmett DunhamEmmett Dunham Member Posts: 1,418 ✭✭✭✭✭
    edited November -1
    Stevens made a lot of hardware rifles, check the conversion table on Numrich and get the models that are the same as yours, gives you a little more resorce to find your bolt.


    Emmett
    · Share on FacebookShare on Twitter
Sign In or Register to comment.