.

breda 610 follower

cooper552cooper552 Member Posts: 5 ✭✭
edited March 2016 in Ask the Experts
Is there any available magazine follower that will work in my Breda 610 20ga? All I have found is a video of someone machining one. any help would be apreciated

Comments

  • charliemeyer007charliemeyer007 Member Posts: 7,351 ✭✭✭
    edited November -1
    I couldn't find any parts or a schematic easily, must be why they made their own. Measure the magazine tube ID. Then look at like an 1100 Rem. You might need to thin it down or alter it some other way to make it work.
  • cooper552cooper552 Member Posts: 5 ✭✭
    edited November -1
    thank you. I was thinking i would have to alter one.

    quote:Originally posted by charliemeyer007
    I couldn't find any parts or a schematic easily, must be why they made their own. Measure the magazine tube ID. Then look at like an 1100 Rem. You might need to thin it down or alter it some other way to make it work.
Sign In or Register to comment.