In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Do you know anyone who can do this faster ??
Colt Super
Member Posts: 31,007 ✭
And maybe for a little less money ???
Thank you.
Doug
I am purchasing a new Colt stainless Lightweight Commander in .38 Super. It has a 1911 style mainspring housing. I would like you to install a 1911A1 style mainspring housing, a grip safety with the "lump" on it, and a 5 pound trigger job. I am buying it from an out-of-state dealer. 1)Can I have it shipped directly to you, for the work ?? 2)How much would it cost ?? 3)What would be the turnaround time ?? Thank you, Doug Wilson ThunderboltRanch@gmail.com 503-8642453
Cylinder & Slide
<bill@cylinder-slide.com> Wed, Feb 25, 2009 at 8:13 AM
To: Thunderboltranch@gmail.com
Reply | Reply to all | Forward | Print | Delete | Show original
Mr.Wilson
This is great to hear from you.
We can certainly do this work for you.
We will have to get you a new main spring housing. Do you want this checkered or plain.? The arched main spring housing that you would want comes in Stainless steel to match the alloy frame and is at a cost of $ 36.95
We would recommend that the new grip safety be the Ed brown style. This will give you the bump that you want.
This is order # 45073S Install ed brown grip safety with memory groove Cost $ 141.25.
For the trigger system that you want we would recommend the following.
Kit/part # CS24-7-365 5 piece trigger hammer set 5lb Cost $ 157.50
To install this into your firearm is order # 45011 and is at a cost of $ 49.50.
When we are done with the project we will test fire for function. This fee is $ 38.00
The above costs do not include the shipping.
Yes, you can have the firearm shipped to us.
We are looking forward to doing this project for you. We are booked ahead, at this time, about 10 ,ten months. If you wish to have this work done, call our toll free number, 1-800-448-1713 and place an order for the work that you want done. We will need your name, address, phone number and the list of the work that is to be done. A 50 % deposit. of the total of the work to be done is required to make a reservation, when you have made a reservation, you will receive a number for this work order. When your work order number rotates to the top of the list, C&S will contact you, instructions will be given to you on when to ship the firearm and what we recommend as best method of shipment. Once we receive your firearm, it will be placed in the order of receipt, we try to have the work done within (6) to (8) weeks.
If you have any further questions,please ask
Dan
Thank you.
Doug
I am purchasing a new Colt stainless Lightweight Commander in .38 Super. It has a 1911 style mainspring housing. I would like you to install a 1911A1 style mainspring housing, a grip safety with the "lump" on it, and a 5 pound trigger job. I am buying it from an out-of-state dealer. 1)Can I have it shipped directly to you, for the work ?? 2)How much would it cost ?? 3)What would be the turnaround time ?? Thank you, Doug Wilson ThunderboltRanch@gmail.com 503-8642453
Cylinder & Slide
<bill@cylinder-slide.com> Wed, Feb 25, 2009 at 8:13 AM
To: Thunderboltranch@gmail.com
Reply | Reply to all | Forward | Print | Delete | Show original
Mr.Wilson
This is great to hear from you.
We can certainly do this work for you.
We will have to get you a new main spring housing. Do you want this checkered or plain.? The arched main spring housing that you would want comes in Stainless steel to match the alloy frame and is at a cost of $ 36.95
We would recommend that the new grip safety be the Ed brown style. This will give you the bump that you want.
This is order # 45073S Install ed brown grip safety with memory groove Cost $ 141.25.
For the trigger system that you want we would recommend the following.
Kit/part # CS24-7-365 5 piece trigger hammer set 5lb Cost $ 157.50
To install this into your firearm is order # 45011 and is at a cost of $ 49.50.
When we are done with the project we will test fire for function. This fee is $ 38.00
The above costs do not include the shipping.
Yes, you can have the firearm shipped to us.
We are looking forward to doing this project for you. We are booked ahead, at this time, about 10 ,ten months. If you wish to have this work done, call our toll free number, 1-800-448-1713 and place an order for the work that you want done. We will need your name, address, phone number and the list of the work that is to be done. A 50 % deposit. of the total of the work to be done is required to make a reservation, when you have made a reservation, you will receive a number for this work order. When your work order number rotates to the top of the list, C&S will contact you, instructions will be given to you on when to ship the firearm and what we recommend as best method of shipment. Once we receive your firearm, it will be placed in the order of receipt, we try to have the work done within (6) to (8) weeks.
If you have any further questions,please ask
Dan
Comments
Most 1911 shooters do their own trigger jobs, but would not consider doing this for someone else due to liability issues. However, if you let everyone know "where" you are located I'm quite sure that there are many qualified gunsmiths that can do a 5 lb. trigger (should be well under $125 unless they use new parts, but for 5 lb. your parts should be OK)
Hopefully Perryshooter can give you some more info.
I agree, their prices and lead times are outrageous. $38 to test fired something they already raped you on?
I'm at 13180 Stoller Road
Dayton, Oregon 97114
503-864-2453 24/7
Doug
did you check Rich's you can find it in the phone book
I know its across the country but you might try Pinnacle High Performance in Pa. I have no personal experience with them but I did correspond with them about some work I was considering and was pleased with thier response.
www.pinnacle-*
Mark
Those guys do excellant work, now if I had charges like that and a 10 month back log I might make it full time as a Smith...you are on the left coast I'm nestled in a holler on the right coast in Virginia.
What you propose is not rocket science, and a good smith on your side of the world should be able to do it. With a lil patience and a good manual, you could do it for cost of parts.
Paul
Mountain Magic Gunsmithing
GEORGE F LONG PISTOLSMITH
Address: 1402 KOKANEE LANE GRANTS PASS, OR 97527 USA
Voice: 1-541-476-7552 Fax:
Contact: GEORGE F. LONG
GUNSMITH, GUN DEALER, PPC, IPSC, LAW ENFORCEMENT, CUSTOM CARRY, GUN PARTS, PISTOLSMITH,
MAC SCOTT ENTERPRISES
Address: P.O.BOX 43 UMPQUA, OR 97486 USA
Voice: Fax:
Contact: MAC SCOTT
FFL DEALER, PISTOLSMITH, GUNSMITHING,
Willamette Valley Gunsmithing
Address: P.O. Box 23525 Eugene, OR 97402 USA
Voice: 1-541-935-2620 *** 1-541-729-8726 Fax:
URL: http://www.willamettevalleygunsmithing.com
Email: willamettevalleygunsmithing@yahoo.com
Pistolsmithing, rebluing, trigger job, action job, glass bedding, accurizing, re-barreling, stock work, FFL, gunsmith, gunsmithing, custom rifle, custom handgun, restoration, rust bluing, tactical, matte bluing, polish bluing, 1911, glock, sig, beretta, HK, FAL, M1A, M14, AR-15, smith&wesson, S&W, s&w, ak47, AR15, remington, browning, savage, AK-47
Kent Singletary (personal recommendation)
Address: Glendale, AZ 85302 USA
Voice: 1-602-526-6836 Fax:
URL: http://www.kscustom.com
Email: kent@kscustom.com
Contact: Kent Singletary
Gunsmith, pistolsmith,