In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
guns gifted
Robin
Member Posts: 1,228 ✭✭✭✭✭
A coworker friend of mine recent received 2 interesting vintage guns from a family member of his. One is a Smith and Wesson Military and police 38 special blued 4" barrel in really good condition the sn is 396056. He would like to know about when it was manufactured if anyone knows. The other gun has a butt plate marked Remington Arms Co but in general it looks like an A-5 Browning 12 ga semi auto shotgun. The sn is 81064. He is wondering if this shotgun would have 2 3/4" chambers and when it would have been made if anyone would know. There is some Browning patent information on the barrel but I don't see information on the choke. Thanks for your help with this information.
Edit: Hoosier thanks. Yes the safety is inside the trigger guard and moves forward and back. Would this be a 2 3/4" chamber gun?
Edit: Many thanks to the Asphalt Cowboy for this information I will pass the information along and suggest that he have a gunsmith check it out. I am sure he would like to use it, the shotgun does not show its age.
Edit: Hoosier thanks. Yes the safety is inside the trigger guard and moves forward and back. Would this be a 2 3/4" chamber gun?
Edit: Many thanks to the Asphalt Cowboy for this information I will pass the information along and suggest that he have a gunsmith check it out. I am sure he would like to use it, the shotgun does not show its age.
Comments
John Browning licensed his patent for that shotgun to Remington which sold it as the Model 11, along with Savage (720). Browning licensed FN in Belgium to manufacture the Browning A-5.
You should only shoot 1 1/4ounce shotshells or lighter otherwise the gun gets beat up too much internally.
You mentioned a choke, you will find it stamped on the lower left side of the barrel under the forearm wood. Value would be from $250 to $350 depending on condition of the wood and metal.
You should only shoot 1 1/4ounce shotshells or lighter otherwise the gun gets beat up too much internally.
I would beg to differ thor.
The Mod 11 will readily handle any 2 3/4" load currently offered by manufacturers as well as reloads kept within published pressure limits. Where action battering comes in is when the recoil system is set-up for light loads and then firing heavy (high pressure) loads.
Robin, print this off for your friend. It shows the proper set-up for the spring, friction piece (bronze piece) and friction ring (beveled steel).
http://www.leeroysramblings.com/hunting/rem_recoilring.jpg
Also. There is a recoil cushion in the rear of the receiver behind the bolt. This part, and it's rivet, needs to be present and in good condition if your friend intends to use this gun. I would suggest taking it to a gunsmith familiar with the Model 11 and have it checked prior to shooting the gun. Damage to the gun, and injury to the shooter, could result if the cushion is not present.
Also on a hundred year old gun, my recommend is to keep the chamber pressure below 11,000 psi (that's 1 1/8 oz loads) my recommend only.
Cowboy: I appreciate the friction ring guide as I needed one.