In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Tanfoglio, Witness Match 10mm

db1db1 Member Posts: 5 ✭✭
edited May 2007 in Ask the Experts
Recently purchased this Witness Match 10mm, great gun, very accurate, hardly used condition, but gun has started ejecting the mag when fired.Problem seems to be related to strength of recoil spring, have tried several differnt strength Wolff springs from 16 to 22 pounds. Can't seem to get it right. The mag latch seems OK. and I have tried four different mags and doesn't change anything. The ejected cases also show a drag mark across the primer. Any ideas? Any help would be greatly appreciated.

Comments

  • tsavo303tsavo303 Member Posts: 8,891 ✭✭✭
    edited November -1
    how bout the mag release spring and catch?
  • db1db1 Member Posts: 5 ✭✭
    edited November -1
    Thanks, The spring and catch seem Ok as far as I can tell. I have heard that replacing the mag latch assembly on these guns is a bear and you have to take out most of the trigger assembly to get at it. The gun is almost unshot so hoping it's not that.
Sign In or Register to comment.