10/22

MrGunz22

what kind of barrel should i get for a 10/22 that has the best accuracy?

gfegfdh

MrGunz22

My 10/22 cycles only with hV ammo. Is there a possibilty to take some weight of the bolt to be able to shoot normal 22s?
Will this hav an effect of the lifetime of the reciever?

in a world full of compromise some don't

MrGunz22

Hi, how do you remove the stock 10/22 barrel from a rifle. Do you need a special tool? Thanks

MrGunz22

I'm thinking of getting a new .22. What do you think of the Ruger 10/22?

MrGunz22

I'm thinking of getting a new .22. What do you think of the Ruger 10/22?

MrGunz22

i have a 10/22 stainless with a stainless deerfield scope and sling carbine. kind of a grayish black woodgrain laminate stock. great shape whats a fair price? thanks charlie good looking unit

MrGunz22

i just bought a 10/22 and i want to know what i can do to make it shoot just alitte better groups

MrGunz22

What is the best ruger 10/22? I plan on buying a 10/22, but there are so many to choose from. I know that I want it to be staimless, and I'm going to put a scope on it. I plan on using it for squirrels and other small rodents. I will also shoot cans and different targets too. Any suggestions?? THANKS [:D]

MrGunz22

i have recently found two 10/22 that i think look pretty cool. One is a 10/22 RD-DZ and the other is a 10/22 RB-DZII. what is the differece? they look the same to me. and what is a ballpark value? both and new in the box.both come with the box and papers. they both have the orangish-red laminated stock. any help please. thanks

MrGunz22

is there any way to make a 10/22 full auto ???

MrGunz22

just polished hammer sear and dissconector also put in light pull springs and bushings half the pull i had but want to know next step adjustable sear or matched hammer and adjustable sear package need an opppinion

MrGunz22

I am puzzeled buy the prices I am seeing on all sites for mags for this gun. I can understand the banned mags of over 10 rounds but even the 10 round mags. are selling for over retail. I just bought a standard replacement mag at wallyworld for $6 and change.Are these aftermarket mags being taken apart and somehow increasing the capacity,and if so,just how is that being done?Thanks,Wade

w.wade brinson

Mk 19

Remove the stock from the barreled reciever, then take a allen wrench and remove the barrel block. You will see it at the front of the reciever, there are 2 screws that hold it in place. Once the block is removed the barrel will pull right out. Reassemble in the reverse order.

MrGunz22

Thanks, thats what i figured. The barrel seemed a little tight and i wanted to make sure i didn't break anything.

remingtonoaks

mk 19 is right. but if i were you i'd write to ruger an get a schematic of it and an owners manual. what mk19 said will get you by this time but next time well you know. you won't have to ask.

MrGunz22

THANKS!