In order to participate in the GunBroker Member forums, you must be logged in with your account. Click the sign-in button at the top right of the forums page to get connected.

Colt Automatic 25 question

ginmasterginmaster Member Posts: 2,669 ✭✭✭✭✭
edited September 2006 in Ask the Experts
How do you take this apart? Whats a good price for these. I paid $150.00. Was that about right?



  • Old FoolOld Fool Member Posts: 1,502 ✭✭✭✭✭
    edited November -1
    In order to field strip the pistol:

    1. Make sure that it is unloaded and the chamber is clear!
    2. Remove the magazine and be sure the striker is in the fired position
    3. Move the slide back until the exit cuts inside the lower edge of the ejection port line up with the barrel retaining lugs.
    4. Turn the barrel clockwise (looking from the front) until it stops
    5. Slide the slide and barrel assembly forwaard and off of the frame.
    6. Remove the recoil spring and guide
    7. Remove the striker, spring, and guide from the rear of the slide.

    Your pistol is now field stripped, further disassembly is not recommended.

    $150 sounds like a very good price for that pistol

    Good luck
  • ginmasterginmaster Member Posts: 2,669 ✭✭✭✭✭
    edited November -1
Sign In or Register to comment.