In order to participate in the GunBroker Member forums, you must be logged in with your account. Click the sign-in button at the top right of the forums page to get connected.

Wards Western Field 20 Ga. repeater

GunswapperGunswapper Member Posts: 1,037 ✭✭✭
edited May 2008 in Ask the Experts
I have a 20 gauge bolt action in need of an extractor. The gun has a box type magazine screwed to the underside of the receiver. The only markings are two lines stamped on top of the barrel about 4" in front of the receiver: "WARDS WESTERN FIELD" over "20 GA. REPEATER". The extractor is about 1 1/16" long and is attached to the right side of the bolt with a screw through a round loop at the rear end of the extractor. The ejector on this gun is unusual (to me anyway) in that it is about 5 1/2" long, made of spring steel, attached at the rear in a groove on the outside of the receiver on the left side, and the front 1 1/2" extends through a slot in the receiver to eject the shell when the bolt is opened. Any help in identifying the manufacturer and model # and in locating an extractor would be appreciated. Thanks, Gunswapper.


Sign In or Register to comment.