Lee .44 Mag 310 Grain

buddyb

I cast a couple of hundred 44 mag 310 grain bullets from a Lee mold.Got them lubed and gas checks installed,but now I am having a hard time finding reloading data.I found one on line that is 21 grains of H-110 but that seems a pretty hot load.I am going to use these in a 5 inch Redhawk.Any suggestions? Thanks

Toolfogie

310 grain Lead SWC or RN + Gas Check (GC)
Bullseye 6.8 gr. 975 FPS
Unique 7.2 gr. 965
2400 13.5 gr. 1,150
2400 14.5 gr. 1,194
True Blue 9.6 gr. 977 start
True Blue 10.7 gr. 1,055 max
Enforcer 16.5 gr. 1,171 start
Enforcer 18.3 gr. 1,301 max

http://www.reloadammo.com/44loads.htm

dcs shooters

18.0grs. of H-110 should put you about 1250fps. 19.0-1400FPS
I'D start about 17.0 and work up from there.
I user 24.0gr. H-110 with a 240HP and got about 1550 out of a 7 1/2in. Redhawk.