In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Making Rolled Crimp 12ga Slugs
bambambam
Member Posts: 4,814 ✭✭✭
I was looking at a video of how rolled crimp works. It gave me an idea.
I shoot Hornady slugs, which are around $12-$14 for a box of 5.
Does anyone know if you can get the componets to make or reload them?
I'm sure I could reload them for ALOT less than retail.
I shoot Hornady slugs, which are around $12-$14 for a box of 5.
Does anyone know if you can get the componets to make or reload them?
I'm sure I could reload them for ALOT less than retail.
Comments
http://www.ballisticproducts.com/
BP has a .50x12 ga wad that might work with a Hornady bullet:
http://www.ballisticproducts.com/RSS-12-Rigid-Structure-Sabot-only-12ga-50_bag/productinfo/322RSS/
You can buy Lightfield slugs for loading.
http://www.lightfieldslugs.com/Lightfield/Products/List/?c=93
Cost me about $3 to take a slug apart. I measured the bullet, it's a .500 S&W 300gr pistol bullet.
I'll need the plastic sabot that fits in the shotgun hull and the little rubber cusion that fits in the bottom of the wad under the bullet.
quote:Originally posted by Hawk Carse
Ballistic Products carries slugs, slug molds, roll crimpers, and manuals for slug loading.
http://www.ballisticproducts.com/
BP has a .50x12 ga wad that might work with a Hornady bullet:
http://www.ballisticproducts.com/RSS-12-Rigid-Structure-Sabot-only-12ga-50_bag/productinfo/322RSS/
You can buy Lightfield slugs for loading.
http://www.lightfieldslugs.com/Lightfield/Products/List/?c=93