Need firing pin for an ancient "Monitor"

Comments

• Options

  pip5255 Member Posts: 1,630 ✭✭✭

  January 2018 edited November -1

  any other markings on it to help id the maker ? monitor was made by a few makers for a hardware company back in the day.

  just because you could doesn't mean you should

  0 · Share on FacebookShare on Twitter
• Options

  pip5255 Member Posts: 1,630 ✭✭✭

  February 2018 edited November -1

  do you have old one ?
  can you provide dimensions ?

  just because you could doesn't mean you should

  0 · Share on FacebookShare on Twitter
• Options

  slinger Member Posts: 1,328 ✭✭✭

  February 2018 edited November -1

  Old one missing.
  Only marking found is an inverted triangle.

  0 · Share on FacebookShare on Twitter
• Options

  mrmike08075 Member Posts: 10,998 ✭✭✭

  February 2018 edited November -1

  See if numrich arms has a firing pin for a crescent arms single shot break open .410 shotgun...
  
  Odds are it will fit - or can be made to fit by somebody with some mechanical skill.
  
  Maybe as a last resort option - a shot in the dark
  
  Mike

  0 · Share on FacebookShare on Twitter
• Options

  pip5255 Member Posts: 1,630 ✭✭✭

  February 2018 edited November -1

  is it held in place with a pin ?
  can you measure the hole diameter and length ?
  
  like this one ?
  https://www.gunpartscorp.com/products/397380

  just because you could doesn't mean you should

  0 · Share on FacebookShare on Twitter
• Options

  slinger Member Posts: 1,328 ✭✭✭

  February 2018 edited November -1

  Youse guys are amazing. I think I've got it.
  Thank you so much.

  0 · Share on FacebookShare on Twitter
• Options

  pip5255 Member Posts: 1,630 ✭✭✭

  February 2018 edited November -1

  let me know if you end up still needing one as I should have one.

  just because you could doesn't mean you should

  0 · Share on FacebookShare on Twitter