In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

Wanted 16 & 28 gauge die sets for RCBS press

AdamsQuailHunterAdamsQuailHunter Member Posts: 2,024 ✭✭✭✭
edited November 2018 in Want Ads (NO 'FOR SALE' or 'FOR TRADE')
I need a set of both 16 gauge and 28 gauge die sets for a AmmoMaster-2 press (that has an insert that unscrews to allow for 1-1/2 x 12 dies) . Val-Scott - Herters - Lachmiller - or any other manufacturer. These were produced quite some time ago and are not currently made.

Many Thanks for taking the time to view my request. Best Regards - AQH
· Share on FacebookShare on Twitter

Comments

  • Options
    B17-P51B17-P51 Member Posts: 2,202 ✭✭✭
    edited November -1
    Could you possibly mean an RCBS "Rock Chucker" press? If that is the case, then any press with 7/8 - 14 threads will work as that is the standard used. All single stage presses use this thread except Herters.
    You may also want to put a post in the reloaders forum referencing this post.
    · Share on FacebookShare on Twitter
  • Options
    AdamsQuailHunterAdamsQuailHunter Member Posts: 2,024 ✭✭✭✭
    edited November -1
    Hello B17-P51 -- Both fine aircraft. My father-in-law was unfortunately flying a "Liberator" and was not escorted by the "Red Tails" over Italy and was shot down and spent time in a POW camp.

    I should not have used the term "Rock Crusher" for AmmoMaster-2. There is an insert/bushing in the top for 7/8 X 14 dies - rifle and pistol dies. When the insert/bushing is removed - you can use 1-1/2 X 12 dies for shotgun shells. The shotgun shell 16 & 28 gauge dies are the ones I need.

    Best Regards - AQH
    · Share on FacebookShare on Twitter
Sign In or Register to comment.