In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
45-90 ammo
SCOUT5
Member Posts: 16,182 ✭✭✭✭
A friend of mine has his grandfather's ( maybe it's great grandfather's) model 1886 Winchester in 45-90. This forefather went to South Dakota in 1871 so he must have bought this rifle while there most likely about the time it was introduced. I don't have the number off of the rifle. The rifle is in good shape and I am inquiring about ammo that can be fired in it. From what I've read the standard at the time was a 400 grain bullet on top of the 90 grains of black powder.
So, is this the right load and does anyone produce a smokeless equivalent to that load that can be safely fired in rifles like this?
So, is this the right load and does anyone produce a smokeless equivalent to that load that can be safely fired in rifles like this?
Comments
The Lyman cast bullet 330 gr hollow point 457122 is a good choice for most uses.
added there was factory ammo for about $50 a box of 20
Ventura Heritage 45-90 Winchester 305gr RNFP Ammo - 20 Rounds
Ventura Heritage 45-90 Winchester 400gr RNFP Ammo - 20 Rounds
If it was mine I would load for it and shoot it. If I had a horse I would pack it around.
To make a long story short. Your rifle might have a slower twist specifically for these lighter bullets. If you do any reloading for it? And the heavier bullets aren't accurate. Try lighter bullets ( 250-350 grains). Loaded to higher BP velocities, 1400-1600 FPS.
There were also the .45-82-405 and .45-85-350.
All used the same 2.4" case as the .45-90 but bullets were heavier and rifle twist rates appropriate.
The 1886 action is strong but an early one likely has mild steel barrel. I would shoot cast bullets in it.
Yes, you can safely fire .45-70s in a .45-90. Accuracy might not be good, but if you just wanted to say you had shot Grandpa's Gun a few times, it would get you by.
Please be advised! That modern 45-70 ammo, might be loaded way hotter than expected. Years back I had one of the 1886 Browning replicas made in Japan. It was no problem with modern ammo. But it kicked like a mule, really unpleasant to shoot, with the original half-moon butt plate.
If you just want to put a small number of rounds, threw grandpa's gun. Get hold of ammo made specifically for "Cowboy Action Shooting"/SASS shooters. It will be loaded with a lead bullet at no more than 1000 FPS. Way easier on the rifle and your shoulder, than modern hunting ammo.
Corbon makes .45-70 ammo...
Their are modern made guns that will not or can not handle this load pressure spike at its peak...
While I would bet a vintage 1886 Winchester made in USA receiver would hold - it's akin to firing modern shells through a Damascus bbl shotgun.
You are playing Russian roulette - statistically sooner or later you will blow the gun and injure or kill yourself...
Why do that???
Why take the risk???
To what end - to what purpose???
There are loads that will cook a ruger #1 action - believe me.
Mike
I have already told my friend it would be best to load for it. But he doesn't load his own. Perhaps a hand loader to load a few rounds now and then is in order.
Thanks again
The only real .45-90 I can find actually in stock is Ventura which is a brand I am not familiar with.
Kind of expensive but if he is only going to shoot on "ceremonial occasions" it won't be bad.
https://www.venturamunitions.com/ventura-heritage-45-90-winchester-305gr-rnfp-ammo-20-rounds/