In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Choke Tubes
Gotdeere
Member Posts: 293 ✭✭✭
A friend has asked me whether the choke tubes for the new line of Stoeger Condors are interchangeable with any other manufacturer's tubes. Told him I don't know, but maybe you fellers would.
TIA for any answers.
OleDuk[:)][:)]
TIA for any answers.
OleDuk[:)][:)]
Comments
So the Question is where and how can I find out the measurements of different choke tubes without a caliber (or any other accurate measuring device)?
Preciate it.
Thanks!
[:)][?]
There's no real way to check the constriction unless the manufacturers post it on thier site. It's really not something that comes up very often. For precise check, I'd just use a caliper, if you don't have one, then go to the local machine shop. They'll likely check it for free.
I know you will, but make sure to check out your pattern. I have several extended turkey chokes for my Benelli SBE and I typically find the best pattern is either 3" #6's with the extra full, or 3 1/2" #4's with the factory full choke. Try it on your gun, you might be suprised of the results...