In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

To glass bed or not?

Debating on whether or not to glass bed my Savage model 12, bull barrel, single shot, with synthetic stock.

Accuracy is good/great...no problems there. The recoil lug is only supported at the rear face of the lug. Synthetic stock is completely open in front of the lug (lug is just like a Rem 700).

Thoughts?

Comments

  • D.S.COLED.S.COLE Member Posts: 611 ✭✭✭✭
    edited November -1
    I am a great advocate of glas-bedding as it usually is a big help with the poorly fitted mass produced factory rifles.
    However since you say that accuracy is great already you can remember " if it aint broke dont fix it".
    glas -bedding shouldnt hurt it but why take the trouble if it shoots fine.
  • rlnblkrlnblk Member Posts: 130 ✭✭✭
    edited November -1
    When I bed rem type rifles I only allow the rear face of the recoil lug to contact the bedding , the bottom sides and front will have clearance.
  • JustCJustC Member Posts: 16,056 ✭✭✭
    edited November -1
    the lug should only be supported at the rear, all other sides need to be free.

    I would think your consistency will improve with a bedding job.
  • dclocodcloco Member Posts: 2,967
    edited November -1
    Thanks for the input everybody!
Sign In or Register to comment.