In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

Neck Sizing Lube

olsenjbolsenjb Member Posts: 230 ✭✭✭
edited December 2006 in Perry Shooter Competition Shooting and Reloading Forum
I've read that if you're neck sizing only, that there is no need to lube the outside of the case. Is that true?
· Share on FacebookShare on Twitter

Comments

  • Options
    B17-P51B17-P51 Member Posts: 2,202 ✭✭✭
    edited November -1
    Yes, if you are using a necksizing die it does not size the outside of the case but comes very close to support it. It is sort of like a poorly made sizing die, although that is oversimplifying it. Neck sizers are precision made dies and will help you shoot better groups as long as all the rounds are going through the same rifle. They work best with bolt actions and may not work at all with semi's and pumps. Hope this helps.
    · Share on FacebookShare on Twitter
  • Options
    olsenjbolsenjb Member Posts: 230 ✭✭✭
    edited November -1
    Yeah...I just wasn't sure if it was still tight enough to necessitate lubing the outside. Do you need to lube the neck at all?
    · Share on FacebookShare on Twitter
  • Options
    B17-P51B17-P51 Member Posts: 2,202 ✭✭✭
    edited November -1
    With a carbide sizer bulb, I do not.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.