In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
need 45/75 WCF loading data
dsmc1
Member Posts: 112 ✭✭
Just bought an 1876 Winchester in 45/75WCF, bought some brass and a set of Lee dies, and discovered the "Load Chart" is not on the other side of the instructions where Step 4 says it should be.
The only load I have found so far is 24 gr of 4198 with a 350 bullet in Cartridges of the World,4th edition.
The die kit came with a .3cc powder scoop, but 24 grains of 4198 would require a 1.9cc scoop per the Lee chart in their Powder Measure Kit, which I have.
I'm assuming there are other options, including a full case of black powder.
Am I missing something? Any leads to Loading data for this cartridge would be appreciated.
Thanks, Dave
The only load I have found so far is 24 gr of 4198 with a 350 bullet in Cartridges of the World,4th edition.
The die kit came with a .3cc powder scoop, but 24 grains of 4198 would require a 1.9cc scoop per the Lee chart in their Powder Measure Kit, which I have.
I'm assuming there are other options, including a full case of black powder.
Am I missing something? Any leads to Loading data for this cartridge would be appreciated.
Thanks, Dave
Comments
Or these, http://www.cascity.com/forumhall/index.php?topic=52208.0