slugging bores

Comments

• charliemeyer007 Member Posts: 6,579 ✭✭✭

  May 2012 edited November -1

  Soft lead ball slightly oversized driven down the tube by a dowel is the easy way. If its a 5 grove you need to used a v block to measure.

  0 · Share on FacebookShare on Twitter
• bambambam Member Posts: 4,814 ✭✭✭

  May 2012 edited November -1

  Many ways I've heard mentioned here.
  
  I've heard egg sinkers & the product that you melt and pour into barrel(can't remember name).
  
  They had some good threads on them & I can't find them[?]

  0 · Share on FacebookShare on Twitter
• nononsense Member Posts: 10,928 ✭✭✭✭

  May 2012 edited November -1

  nemesisenforcer,
  
  Here is one of the threads which covers it neatly:
  
  http://forums.gunbroker.com/topic.asp?TOPIC_ID=525062&SearchTerms=slugging,barrel
  
  Best.

  0 · Share on FacebookShare on Twitter
• Riomouse911 Member Posts: 3,492 ✭✭✭

  May 2012 edited November -1

  Cerrosafe is the casting material. It melts at a low temp, and is easy to pull out of chambers and barrels when properly done.

  0 · Share on FacebookShare on Twitter
• Alan Rushing Member Posts: 9,002 ✭✭

  May 2012 edited November -1

  There are at least a couple of good explanations there!

  0 · Share on FacebookShare on Twitter