In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

10 mm reloads

JamesNorrisJamesNorris Member Posts: 23 ✭✭
edited May 2013 in Perry Shooter Competition Shooting and Reloading Forum
I just purchased some .40 cal. 208 gr.cast bullets for my 10mm at the Gunshow. I can find no reloading data for that weight bullet, but am told they came from Lymam molds. I normally use Bullseye, Unique, Blue Dot etc. for Pistol. I usually load conservitively and do not want hot loads. Can someone suggest where I can get reliable data, Lyman never answered the phone.
Jed
· Share on FacebookShare on Twitter

Comments

  • Options
    steve4102steve4102 Member Posts: 186 ✭✭✭
    edited November -1
    Use 200gr data, start low and work up. My Lyman 4th lists 200gr max. Your 208gr are most likely poured from a 200gr mold cast with a little more lead than Lyman used making them drop heavy.
    · Share on FacebookShare on Twitter
  • Options
    babunbabun Member Posts: 11,054 ✭✭✭
    edited November -1
    Check those bullets carefully. You just may have the 210 grain 41mag bullet which is .410 or .411 diameter.
    · Share on FacebookShare on Twitter
  • Options
    dakotashooter2dakotashooter2 Member Posts: 6,186
    edited November -1
    I actually used resized .41 mag bullets for some of my 40 S&W loads. They are my most accurate bullet. I use the data for 200 gr bullets.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.