In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

CFE223

ToolfogieToolfogie Member Posts: 1,254 ✭✭
I would like to try this powder but there is very little load data out there. Anyone using it?
I want to load 55gr and 62gr 223 FBJBT for my ARs, one has a 1/9 twist and the other is 1/8.
Anyone have load data and also, what COAL are you using?
Thanks,
Gary

Comments

  • RobOzRobOz Member Posts: 9,523 ✭✭✭
    edited November -1
    Hodgdon.com has CFE223 data.
  • ToolfogieToolfogie Member Posts: 1,254 ✭✭
    edited November -1
    But they list COAL at 2.200 and I've always used 2.250 That's why I was wondering what other reloaders are doing.

    That plus they only list a couple loads. There must be more info available somewhere but I'll be darned if I can find it.
  • RobOzRobOz Member Posts: 9,523 ✭✭✭
    edited November -1
    those folks at sierra always helped me when I had a reloading ?
  • dcs shootersdcs shooters Member Posts: 10,969
    edited November -1
    I'd just use the Hodgdon data. That powder is so new that it's going to take some time to get more info.
    .050 longer OAL will lower their stated pressure a little.
  • nononsensenononsense Member Posts: 10,928 ✭✭✭✭
    edited November -1
    Toolfogie,

    This is the data from Hodgdon's website which gives you a range from start to the upper end of the pressure range. New powders often require us as reloaders to work up new data from the start loads and stopping when we reach maximum loads or the best accuracy node. Each rifle is different so what works for one shooter may not be the best for another.

    40 GR. NOS BT Hodgdon CFE 223 .224" 2.280" 27.5 3457 40,600 PSI 29.0 3667 48,200 PSI
    45 GR. SIE SP Hodgdon CFE 223 .224" 2.240" 27.5 3358 40,800 PSI 29.0 3536 47,200 PSI
    50 GR. SPR SP Hodgdon CFE 223 .224" 2.210" 27.0 3241 41,500 PSI 28.5 3505 53,600 PSI
    53 GR. SIE HP Hodgdon CFE 223 .224" 2.200" 27.0 3245 45,900 PSI 28.5 3415 52,900 PSI
    55 GR. BAR TSX FB Hodgdon CFE 223 .224" 2.180" 24.7 3065 44,600 PSI 27.4 3317 54,000 PSI
    55 GR. SPR SP Hodgdon CFE 223 .224" 2.200" 26.0 3133 43,300 PSI 27.8 3329 51,300 PSI
    60 GR. HDY V-MAX Hodgdon CFE 223 .224" 2.250" 25.0 3007 46,000 PSI 26.7 3176 53,400 PSI
    63 GR. SIE SP Hodgdon CFE 223 .224" 2.200" 25.0 2957 46,300 PSI 26.4 3113 53,500 PSI
    69 GR. SIE HPBT Hodgdon CFE 223 .224" 2.235" 23.5 2788 43,800 PSI 25.8 3029 54,600 PSI
    70 GR. SPR SP Hodgdon CFE 223 .224" 2.140" 23.0 2719 45,600 PSI 24.7 2900 53,800 PSI
    75 GR. JLK VLD Hodgdon CFE 223 .224" 2.250" 23.0 2680 45,200 PSI 25.0 2876 54,400 PSI
    77 GR. SIE HPBT Hodgdon CFE 223 .224" 2.260" 22.5 2627 45,400 PSI 24.3 2811 53,500 PSI
    80 GR. SIE MK Hodgdon CFE 223 .224" 2.550" 23.0 2638 46,700 PSI 24.4 2785 53,600 PSI
    90 GR. SIE HPBT Hodgdon CFE 223 .224" 2.380" 21.0 2391 45,900 PSI 22.8 2554 53,500 PSI

    Best.
  • USN_AirdaleUSN_Airdale Member Posts: 2,987
    edited November -1
    for my AR-15/M4 type rifle with a hammer forged 16", 1-7 twist barrel, i use 26.5 Gr. CFE223, CCI 400 primer and Hornady's 55 Gr. FMJBT bullet.

    in one 20 shot group, i got 17 rounds in a 2" bull @ 100 yds., 9 in a 10 shot group and 5 of 5 in a 1 3/4ths inch bull.

    your results may vary !!
  • NeoBlackdogNeoBlackdog Member Posts: 16,565 ✭✭✭✭
    edited November -1
    quote:Originally posted by USN_Airdale
    for my AR-15/M4 type rifle with a hammer forged 16", 1-7 twist barrel, i use 26.5 Gr. CFE223, CCI 400 primer and Hornady's 55 Gr. FMJBT bullet.

    in one 20 shot group, i got 17 rounds in a 2" bull @ 100 yds., 9 in a 10 shot group and 5 of 5 in a 1 3/4ths inch bull.

    your results may vary !!


    A 55 grain bullet is pretty light for that 1/7 twist. I'll bet if you used a heavier bullet, say 70 or 75 grains, your groups would tighten up even more.
Sign In or Register to comment.