marlin 32-40

Comments

• Options

  PJ Member Posts: 1,556 ✭✭✭✭✭

  March 2007 edited November -1

  No.
  Pete

  0 · Share on FacebookShare on Twitter
• Options

  HandgunHTR52 Member Posts: 2,735

  March 2007 edited November -1

  Have you tried Old Western Scrounger for ammo?
  
  http://www.ows-ammo.com/catalog/

  0 · Share on FacebookShare on Twitter
• Options

  glabray Member Posts: 679 ✭✭✭✭

  March 2007 edited November -1

  The 32-40 is pretty much a handloading proposition. About the only factory ammo you'll find is some of the Winchester stuff that came out with the John Wayne carbines. That has nickled cases and jacketed bullets. Those go for around $45 a box of 20 on auctions. New-old-stock Winchester brass goes for nearly $100 a bag of 50 if you can find it. Winchester MAY make a special run of the brass if enough of us keep bugging them about it. You can easily reform 30-30 or 38-55 brass into 32-40. Some commercial bullet casters can supply bullets. I've used those by Lazer-Cast but they are a bit harder than I like.

  0 · Share on FacebookShare on Twitter
• Options

  38anup Member Posts: 42 ✭✭

  March 2007 edited November -1

  Last I knew midway has the brass. http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=434686
  I bought 2 bags,1 bag was left alone and loaded with cast bullets. The other was trimmed .020 to allow clearance for cycling thru my winchester, when loaded with 32 special jacketed bullets

  0 · Share on FacebookShare on Twitter