Rem. 742 Woodsmaster bolt?'s

Comments

• elkmaniac Member Posts: 138 ✭✭✭

  December 2002 edited November -1

  You will have to remove the barrel to get the bolt out of the gun. This is achieved by removing the barrel nut with the proper size wrench counter clockwise front view, if Ive read your question right you have already removed the operating handle. Now with the barrel removed the bolt will come out the front of the gun.

  0 · Share on FacebookShare on Twitter
• JudgeColt Member Posts: 1,790 ✭✭✭

  December 2002 edited November -1

  Can you get an extractor? There was a rumor that Remington was not selling them (and the rivit) anymore, but I never tried to verify.

  0 · Share on FacebookShare on Twitter
• hitman#1 Member Posts: 127 ✭✭

  December 2002 edited November -1

  Yes I think I can get one easier than I can gat that barrel off.
  Numrich has them
  JW

  0 · Share on FacebookShare on Twitter
• MIKE WISKEY Member, Moderator Posts: 9,971 ******

  December 2002 edited November -1

  order 2 or 3 rivets with each extractor, if you order 1 you'll need 2

  0 · Share on FacebookShare on Twitter