In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
How do I disassemble a modle 66 Remington?
2 gun
Member Posts: 377 ✭✭✭
I Bought a model 66 Remington with the nylon black stock and nikcle plating for 100 bucks.The bad news is it's got a cracked forarm.I was going to remove the action from the stack and fix it.The problem is that the remove part is'nt working out.I am verry mechinecaly inclined but this thing has got me stummped.Does anyone know how to disassemble this gun?
IT"S better to die by fire then serve by force
It's not gun control.It's personal defence elemanation. They only want to control ours.
IT"S better to die by fire then serve by force
It's not gun control.It's personal defence elemanation. They only want to control ours.
Comments
Gun control is a steady hand
Sarcastic humor a specialty
Audemus jura nostra defendere"
1.fix or replace the stock.
2replace a screw on the outside of the receiver that was replaced with a non factory type.
3.clean clean clean.
4.reassemble
5.auctualy shoot the gun.
6. deside if I am going to keep it or sell it.
Does anyone know where or if I can find a new stock?
Is it ok to put it in the dish washer?
Can I use fine steel wool on the nickel plateing?
Does anyone know of a sorce for the screw?
Because I removed the barrel will I have to head space it?
This is the Remington model 66 .I belive they call this the apachie?It has a black nylon stock and nickel plated barrel and receiver.
IT"S better to die by fire then serve by force
It's not gun control.It's personal defence elemanation. They only want to control ours.
Be sure to take a polaroid of the way the little flappy thing that sits on top of the barrel looks before you take the barrel off, and don't forget to stop the bolt so it doesn't get caught (in back & below) on the sear struts, or you'll have a &%#@$ of a time putting it back together.
The screw that's supposed to be there has a cruciform head (two slots-not phillips), and should hold the barrel clamp securely in its' slot.
Dishwasher safe? You gotta be kiddin'.
If you know it all; you must have been listening.WEAR EAR PROTECTION!
Mobuck
IT"S better to die by fire then serve by force
It's not gun control.It's personal defence elemanation. They only want to control ours.
http://groups.yahoo.com/group/nylonrifles/
You can never have too many guns!!!