Ithaca M37 disassembly

Comments

• Options

  MIKE WISKEY Member, Moderator Posts: 9,972 ******

  September 2008 edited November -1

  1st remove the butt stock, then take out the large screw and the lower rear of the action, the trigger group will come out then (the butt stock screw puts tension on the large screw). remove the barrel, look into the recever at the bottom of the bolt. there is an hour glass shaped part, with a small screw driver move the part away from the operating handle bar and move tho opration handle forward off the action. the bolt will now be removable .

  0 · Share on FacebookShare on Twitter
• Options

  TRAP55 Member Posts: 8,270 ✭✭✭

  September 2008 edited November -1

  http://stevespages.com/ipb-ithaca-model37.html
  
  http://stevespages.com/pdf/ithaca_3787.pdf

  0 · Share on FacebookShare on Twitter
• Options

  bigfoot_4 Member Posts: 310 ✭✭✭

  September 2008 edited November -1

  This web site has alot of info:
  http://www.ithacagun.com/model37schematic.html
  
  Hope it helps
  Bigfoot [8D]

  0 · Share on FacebookShare on Twitter