In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Ak build

bill carsonbill carson Member Posts: 5 ✭✭
edited February 2015 in Ask the Experts
hello just a short question can a stamped ak receive be used on milled ak kit thank you

Comments

  • bill carsonbill carson Member Posts: 5 ✭✭
    edited November -1
    ive been thinking of building an ak-47, any advice on a project like this, is it tuff?? any gunsmithing skills needed?? also what are some supliers where i could get the best milled recievers, chrome lined barrels, parts and acc. stuff like that
  • usmccjcusmccjc Member Posts: 20 ✭✭
    edited November -1
    Generally yes. It depends on who did the receiver. I have a stamped that I put a slidefire setup on after building and the slidefire is setup for a milled receiver. Its about 10 degrees off. Still works great, hardware all fit, but you will see discrepancies on a stamped depending on where it was made. May need a metal file. Barrel shouldn't matter.
  • 1022man1022man Member Posts: 512 ✭✭✭
    edited November -1
    It wont work. They are different. That is why the milled receiver parts kits are cheaper. The trintums are part of the milled reiever and are a seperate parts on the stamped.
Sign In or Register to comment.