In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Norenco Tokarev--(NOT Macarov)

Twowings2UTwowings2U Member Posts: 90 ✭✭
edited May 2015 in Ask the Experts
need dis-assembly info for Tokarev-Norenco
Not Makarov

Comments

  • rufe-snowrufe-snow Member Posts: 18,649 ✭✭✭
    edited November -1
    U Tube, is your friend.


    Put this in the search panel, "tokarev disassembly"
  • fordsixfordsix Member Posts: 8,722
    edited November -1
    undo front bushing like a 1911, don;t let the little button fly..undo clip on R side slide out takedown lever and slide top end forward
  • gruntledgruntled Member Posts: 8,218 ✭✭
    edited November -1
    Easier to take out the pin first & let the slide go forward. Just be sure to put your hand in position to hold the spring so it doesn't kink up. I find that is an easier way to take down a 1911 also.
  • v35v35 Member Posts: 12,710 ✭✭✭
    edited November -1
    Push bicycle chain clip rearward to disengage the slide stop.
    Push muzzle slightly rearward and slide stop will fall out.
    Slide will be free to move forward and off pistol.
    Hammer housing will lift off and out.
    Don't take hammer housing apart or remove safety. It's unnecessary.
    If it's a 213-9mm, a push fit pin holds the magazine spacer in.
    These are accessed after removing the grips.
    The 213-9mm can be converted to 7.62x25 as the frame is already one that was adapted to a narrower magazine with pin and spacer.
  • Twowings2UTwowings2U Member Posts: 90 ✭✭
    edited November -1
    Thanks to all!!!
Sign In or Register to comment.