In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
O/U top lever
mgbauer64
Member Posts: 9 ✭✭
I have a new Tristar O/U. Fired a couple boxes through it, now the top lever won't stay engaged to close barrels. I have to hold it over manually, can this be tightened or anything? Thanx
Comments
Its a Tristar : Its now wore out !!!
Good Luck ::::
and : just one word !
GUNSMITH !!!!!!
Thanks !!!
I Grew Old Too Fast (And Smart Too damn Slow !!!) !!! :?
Contact them or perhaps your local gunsmith.
http://www.tristararms.com/contact-us/
added
So the not very good schemetic from the manual downloaded from the above website lists part # 62 as the top lever spring, as a good place to start. I suspect there could be other spring power for the bolt #51 - a better schematic or hands on would help a lot.
http://www.tristararms.com/wp-content/uploads/2015/04/Manual_Over-Under.pdf
It would appear that something went wrong, perhaps the return spring has broken. A schematic of your model and proper fitting screwdrivers would be very helpful for a DIY repair.
Contact them or perhaps your local gunsmith.
http://www.tristararms.com/contact-us/
I believe that Charlie is on the right track. Is there any tension on the lever when you move it in either direction?
quote:I have a new Tristar O/U.
quote:Contact them...
Based on the fact that this is a new firearm, why would you not contact to the manufacturer's rep and get this resolved through them? It's new, send it back to the maker and let them resolve the problem. That's what warranties are for.
Best.