In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
32-20 thick base
peddler
Member Posts: 881 ✭✭✭✭
I was shooting some 32-20's with a old SW and cylinder locked up (would not turn). Trouble was that one of the factory Remington shells had a very thick case base (bottom of shell with primer). Primer was not the cause but the base was .010" too thick. Rest of shells in same box were fine. These were Remington factor shells. Very odd to have this happen, anyone else ever have this trouble with factory shells?
Comments
Neal
A single case made it from the set up the tooling phase to loaded ammo, it happens. Off center flash holes and other flaws hardly ever got out back when there was such a thing as quality control and people that cared about their work.
I still have some Remington golden bullets 22 I bought in the late 60's for a penny each. They still function better than most new bulk packed crap sold today.
The 32-20 High Velocity rifle rounds had jacketed bullets and marked HV on the head stamp. They will indeed fit and fire in a S&W, and you should not do it.
A single case made it from the set up the tooling phase to loaded ammo, it happens. Off center flash holes and other flaws hardly ever got out back when there was such a thing as quality control and people that cared about their work.
I still have some Remington golden bullets 22 I bought in the late 60's for a penny each. They still function better than most new bulk packed crap sold today.
+1...what Charlie says!
EDIT 1
quote:these were revolver rounds, thanks for the input.
It does not matter if they were revolver rounds, or HS rifle rounds. The dimensions for the case are the same. It is just that the HS rifle rounds were loaded to slightly higher pressures for use in the 1892 Winter rifles. As Charlie, has said, we are all humans, setting up machines for production, in this case. Occasionally, one squeaks by on the line, when making adjustments in the set up. I am sure there have been procedures developed to try to prevent this, by all manufacturers, but alas, we are all, only, still human.
Best