In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options
Bob the hammer safe?
mrdropcloth
Member Posts: 614 ✭✭✭
I have a Taurus model 85 Lite weight 5 shot revolver with standard hammer.
My question is , would it be safe and dependable to have a gunsmith "bob" the hammer so it wouldn't snag in trouser pocket(s)?
My question is , would it be safe and dependable to have a gunsmith "bob" the hammer so it wouldn't snag in trouser pocket(s)?
Comments
We know that Taurus has had problems with parts breaking, particularly with their MIM parts (of which the hammer is one). You could probably "safely" bob a hammer yourself with a Dremel tool, but it just doesn't seem to be a good idea to alter such a critical part.
If you decide to do it, at least order a spare hammer for you to keep in the box, just in case you decide to sell it some day.
Neal
I think you probably could do this with a Taurus too, and get it to be "safe and dependable", but the only way to really know is to try it and see. If you're willing to take the risk, and your gunsmith is willing to replace the hammer if it doesn't work, you could try this.
Most "dependable" way to get a hammerless revolver is just to buy one!
I might add, that having owned/tried both, I actually prefer the revolver WITH hammer. Of course being able to cock the revolver if you want a single action shot is an advantage. I personally also see snagging on the pocket as an ADVANTAGE. . .it keeps the revolver from falling out your pocket by accident, or anyone ELSE from pulling it out.
Way to get the revolver NOT to snag is simply to place your thumb over the hammer when you draw.
As has been pointed out, Taurus would not be my first choice to stake my life on.
EDIT 1
quote:quote:Originally posted by gunnut505
OP about Taurus 85 hammer bobbing shouldn't get clogged up with spurious claims about other makes.
I bobbed the hammer on my Taurus 85 ultralight in 17HMR with no problems whatsoever. It left the base of the hammer 1/4" proud of the rear sight (which got dehorned). All 8 shots go off with no difficulties in ignition.
If your 85 is centerfire, you may need a Wolfe spring, then again; you may not.
Again from professional experience(not just bobbing one or two, but over 2 dozen), the Taurus is better served with a little stiffer mainspring. The centerfire primer cups are workhardened steel, not brass, like the rimfires. My customers need their gun to go bang when they pull the trigger, not after a return trip to the shop.
Way to get the revolver NOT to snag is simply to place your thumb over the hammer when you draw.Yep. Hideout Gun 101.
And sliding your thumb up underneath the hammer spur as you cram it IN a pocket or holster is a good move.
I've had issues with Charter Arms and a model 37 Chief.
If it doesn't bother you to go to a heavier trigger pull then go ahead
and cut the hammer spur.
I bobbed the hammer on my Taurus 85 ultralight in 17HMR with no problems whatsoever. It left the base of the hammer 1/4" proud of the rear sight (which got dehorned). All 8 shots go off with no difficulties in ignition.
If your 85 is centerfire, you may need a Wolfe spring, then again; you may not.