In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

Remington 742

burnrmanburnrman Member Posts: 2 ✭✭
edited June 2005 in General Discussion
How does the bolt come out of a Woodmaster 742??[?]
· Share on FacebookShare on Twitter

Comments

  • Options
    buddybbuddyb Member Posts: 5,249 ✭✭✭✭
    edited November -1
    You need to get a Sporting Rifle take down manual by J.B.Wood.It is more involved than most of us can explain on line.
    · Share on FacebookShare on Twitter
  • Options
    nunnnunn Forums Admins, Member, Moderator Posts: 36,009 ******
    edited November -1
    It has been my experience that the typical 742 shooter shoots it until it jams up or breaks and then takes it to a gun show and trades or sells it. Been burned by several, won't buy anymore.

    FFL Dealer/Full time Peace Officer, Moderator of General Discussion Board on Gunbroker. Visit www.gunbroker.com the best gun auction site on the Net! Email gpd035@sbcglobal.net
    · Share on FacebookShare on Twitter
  • Options
    MIKE WISKEYMIKE WISKEY Member, Moderator Posts: 9,972 ******
    edited November -1
    YOU HAVE TO REMOVE THE BARREL (LARGE NUT UNDER THE FOREND), AND THE OPERATING HANDLE (SMALL PIN, FROM THE TOP DOWN). BEST LEFT TO A GUNSMITH.
    · Share on FacebookShare on Twitter
  • Options
    danski26danski26 Member Posts: 284 ✭✭✭
    edited November -1
    When you take that pin out be very careful you don't loose it. it's tiny and has a liking to jump to dark corners of your shop. Brownells has replacements. You also need a special wrench to take off that barell nut. Or if your careful you can get it with a vice grip or channel lock pliers. I always chew it up though, along with the action bars next to it.

    danski
    · Share on FacebookShare on Twitter
Sign In or Register to comment.