In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Manuhrin PP

dfletcherdfletcher Member Posts: 8,175 ✭✭✭
edited September 16 in Ask the Experts

I bought a Manuhrin made Walther PP in 32 ACP and it's marked/finished differently than the other Walther, Manuhrin models I already have.

IMG_1106.jpg

Grips are original, however I presume the gun has been refinished at some point, although the lettering and numbers are sharp. No soft edges anywhere. However any other Walther, Manhurin I've seen and own is pretty nicely blued

The serial number on the slide and frame match. Everything works as it should. There is another number stamped on the front handguard -

IMG_1110.jpg

The above number was stamped before the current finish was attached. I have a Star 9mm with a similar appearing stamp which designates that it was used by a West German police or state level constabulary department. Am wondering if anyone has any info on this? Were PPs repurposed for local French, German police types?

I got the gun for a good price and I reload, 32 ACP in the larger gun should be pretty pleasant.

· Share on FacebookShare on Twitter

Comments

  • montanajoemontanajoe Forums Admins, Member, Moderator Posts: 59,958 ******

    On the frame, the lower half of numbers 2,7,and 9 are pretty faint. Also think refinish. Not bad though. I'd own and shoot it. Heck yeah

    · Share on FacebookShare on Twitter
  • GrasshopperGrasshopper Member Posts: 16,981 ✭✭✭✭

    yea been parked but some of those coming in had a lot of blue wear. Looks fine to me and your mag is original. I like it.

    · Share on FacebookShare on Twitter
  • yonsonyonson Member Posts: 941 ✭✭✭

    Guessing that it was glass bead blasted (possibly to remove rust) and then refinished. If there is a 2 digit number next to an antler stamped on the upper frame visible through the ejection port, that would be the year of proofing and therefore the year of manufacture. Serial# seems to indicate 1973.

    · Share on FacebookShare on Twitter
  • dfletcherdfletcher Member Posts: 8,175 ✭✭✭
    edited September 28

    Thanks all. For some reason I had started a while back reloading for the 32 so I have plenty of ammo and brass.

    I found additional info on the Walther site. Looks like a West German police import that was refinished prior to import:

    https://www.waltherforums.com/threads/1960-vintage-jw1762-serial-marked-pp.35290/

    · Share on FacebookShare on Twitter
Sign In or Register to comment.