In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

info needed on hk 4

steven mobbssteven mobbs Member Posts: 234 ✭✭✭
edited February 2004 in General Discussion
found a bargain today at the local gun bonanza--hk4 .380 only has 1 clip but is very thin and light--anyone have any specs on this gun? thanks sm[:o)][:o)]

steven mobbs

Comments

  • kimberkidkimberkid Member Posts: 8,858 ✭✭✭
    edited November -1
    specs? exactly what are you wanting to know?

    I have one I picked up for $225 a couple years ago ... I've heard rumors the 380 cartrige will crack the frame ... mine was well used when I got it, and I've ran quite a few rounds through it too ... no cracks yet so I don't know if there's any truth to that or not ... if it does, HK won't do anything about it since I'm not the original owner and besides ... its long out of production.

    Chance favors the prepared mind [8D]

    Topeka.gif
    If you really desire something, you'll find a way ?
    ? otherwise, you'll find an excuse.
  • mark christianmark christian Forums Admins, Member, Moderator Posts: 24,453 ******
    edited November -1
    The firing pins are a weak spot and a source of trouble and seem unavailable from most common sources. I've owned a few of these HK-4 pistols and they are simply an updated version of the older Mauser HSc offered in various calibers or with conversion kits available to change calibers at will. These were good little pistols, but not exceptional in my own opinion.

    Mark T. Christian
  • nunnnunn Forums Admins, Member, Moderator Posts: 36,057 ******
    edited November -1
    I wish I had bought one, back when they were cheap and you could get one gun in four calibers.

    SIG pistol armorer/FFL Dealer/Full time Peace Officer, Moderator of General Discussion Board on Gunbroker. Visit www.gunbroker.com the best gun auction site on the Net! Email davidnunn@texoma.net
Sign In or Register to comment.