In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Revolving Shotgun Built From Scratch☺
EMCS
Member Posts: 4,063
Using chambers cut off 12 ga. scrap barrels and a new $10 bbl for an Italian auto shotgun, the only other gun part is a scrapped hammer from a 1857 Remington perc revolver:
Loads like a SAA Colt but underlever rotates and cocks it. Blow-by is negligible, hardly noticeable with normal shirt sleeve.
Opened for some still shots, at top of the inside pix screwed in is the firing pin, impact type with return spring. The ratchet or star with the hand is visible below on the left side, also the pawl that cocks the hammer. The cylinder indexing lock is external, operated by the under lever. At very bottom the small knob releases the cylinder to turn clockwise for loading.
Due to limited equipment I was unable to copy existing mechanisms so it is pretty much designed from scratch, largely by cut and try, trial and error, et
Comments
Notice the differences with the bottom pic?
Wood and some metal gone to show the inerds, like a cut-a-way.
different butt stock, checkering ?
If you look closely on the top picture, you can see the checkering far left. It's in the dark, but it's there.
It's just some wood-panels that has been removed - like a side-lock shotgun.
Seriously.