In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

I need small nuts, does anybody have small nuts?

Big Sky RedneckBig Sky Redneck Member Posts: 19,752 ✭✭✭
edited September 2004 in General Discussion
[:D] I lost a real small nut on my muzzleloader (CVA Magnum inline) that goes onto the tiny bolt for the ramrod holder, anybody got one?

____________________________________________________
I'm not apologizing, I am what I am
There is no compromising, I don't give a damn
Ozzy Osbourne - Lightning Strikes
2004052802_Display-25.gif
· Share on FacebookShare on Twitter

Comments

  • Options
    Bert H.Bert H. Member Posts: 11,279 ✭✭✭
    edited November -1
    Kind of a loaded question there... I guess there is only one safe way to answer it... Yep, I got a pair of Big'ns, and that probably won't work for your project[:D]

    Bert H.

    Real Men use a SINGLE-SHOT!
    · Share on FacebookShare on Twitter
  • Options
    gonepostalgonepostal Member Posts: 604 ✭✭✭✭
    edited November -1
    i knew a guy that lost one in a motercycle wreck ,he hit a guide wire on a phone pole ,so he was left with one

    i will now put ten round mags in all my pre ban guns ,just to show defiance

    dhs-advisory-elevated.gif
    · Share on FacebookShare on Twitter
  • Options
    TheBrassManTheBrassMan Member Posts: 3,808 ✭✭✭
    edited November -1
    He was left with the left one??


    Nowhere in the U.S. Constitution does it state: "Seperation of Church and State".

    "Those who beat their guns into plow shares; will plow for those who don't."

    "Woo unto you who call good evil and evil good."

    62038332.jpgawcountdown.gif
    · Share on FacebookShare on Twitter
  • Options
    ace22ace22 Member Posts: 544 ✭✭✭✭
    edited November -1
    I'm gonna avoid the obvious jokes.Try www.metricfasteners.com/catalog and see if they got what you need or if you know diameter and thread count drop me an e-mail and if I've got it, you will too in a few days.

    I'm not a hippy!I'm a well groomed mountain man
    · Share on FacebookShare on Twitter
  • Options
    duckyducky Member Posts: 1,501 ✭✭✭✭✭
    edited November -1
    7mm nuts aren't small enough for ya'? [:p]

    I have nothing else to contribute.. [:)]
    · Share on FacebookShare on Twitter
  • Options
    IconoclastIconoclast Member Posts: 10,515 ✭✭✭
    edited November -1
    7mm, try machinist or optometrist shops.

    "There is nothing lower than the human race - except the french." (Mark Twain) ". . . And liberals / demoMAGGOTS" (me)
    · Share on FacebookShare on Twitter
  • Options
    STRIPPER-TIPPERSTRIPPER-TIPPER Member Posts: 323 ✭✭✭
    edited November -1
    How about just calling CVA and having them send you one. They should have it since they made the gun in the first place. They may even send it for free.
    · Share on FacebookShare on Twitter
  • Options
    Big Sky RedneckBig Sky Redneck Member Posts: 19,752 ✭✭✭
    edited November -1
    Have you ever walked into a hardware store and asked a clerk, "do you have small nuts?"

    Gun is fixed with the help of a new machine screw and nut.

    ____________________________________________________
    I'm not apologizing, I am what I am
    There is no compromising, I don't give a damn
    Ozzy Osbourne - Lightning Strikes
    2004052802_Display-25.gif
    · Share on FacebookShare on Twitter
  • Options
    jnmiller75jnmiller75 Member Posts: 899 ✭✭✭✭
    edited November -1
    quote:Have you ever walked into a hardware store and asked a clerk, "do you have small nuts?"


    No, but I once walked in a hardware store, and when the gal asked if she could help me, I said I was just looking for a screw.[:D]
    · Share on FacebookShare on Twitter
Sign In or Register to comment.