In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
My new motherboard will not have anay ide/pata cable ports so I will be in need of an adapter like the one listed below. The stats list dvd/cd-rom drives and what not; but my question is will this adapter work on and convert pata floppy drives?
Someone gave me a laptop that has windows vista on it. Problem is the person that put vista on it didn't have the code and of course it shut down after 30 days. I can get into safe mode. What would it take to put a legal vista on it? If I can repair it my grand son will get it.
I need to a run diagnostics on my computer...In the book it says to open up Pc Doctor to do this...My problem is that it came with windows 2000 in it and has been upgraded to Xp pro... Tried to open Pc Doctor and it doesn't exit..Does Xp pro call it something else???
Can a camera you use on your computer be used to load its images to your computer to be saved? To put it another way can it be used as a security camera?
I can't remember my windows password on one of my computers and need to either disable the password funtion or bypass it in order to log onto my network system. Is there anyway I can change my password without remembering my old one or is there some way I can disable the password funtion. I have had to do this before but cannot for the life of me remember what steps I took to disable the password. HELP!
i have dial up at home [V] and just got dsl at work [:D] but my labtop wont seem to connect with the dsl its keeps looking for the dial up how do i convert it? thanks in advance
Down loaded ie8 about four weeks ago and have had nothing but trouble since. Main thing is a very slow computer. I can reset and it speeds up for a couple of hours. I think I was running ie6 and was happy but bought into the newer/better thing. If I delete ie8 will ie6 still be there?
I had to replace a case fan in my computer cause I heard a weird noise and determined a blade is cracked. The bummer is that is was in a tediuos metal enclosure and you had the take off and install so may hard to reach screws to replace the fan.
Long story short; I do not know if I accidently shorted out the board or if its a hard-drive problem, but when I go to start up my computer it comes to the screen that says press 'del' for setup, ctrl + z for ez flash bios etc.... When that screen appeares it just stays there for an abnormally length of time. It would only stay on that screen for 2-3 seconds at most, not it can take two to three minuters or longer to get to the WIN 7 welcome screen.
The odd thing is every function on my computer seems to be fine, just the start-up takes waaaay too long.
Did I short out a component?
Is my hard-drive to blame?
Any help is appreciated.
P.S. I have my HD split into 2 partitions, and I did a clean install of the partition where the OS is, but the same problem still occurs.
hi
computer started runnin REALLy slow yesterday.
did all the disc clean up and defrag, closed all programs, did virus scan etc, but no luck.
today I did system restore to 1/1/09 and now everything is back to normal.
this all started when the mrs was searching for something on the internet.[B)]
anyway, is there a way to find out what is different (programs etc) between 1/1/09 and 1/7/09 so i can delete it?
thanks!
tom
BTW I am a computer idiot, so please keep it simple![:)]
can you put 2 different video cards in a computer when they're from different mfrs and use totally different drivers?
right now I do have 2 vid cards with a monitor on each one, everything works fine cuz they're both from the same mfr and use the same driver.
but I got this mongo 21" monitor that can do a 2048x1536 resolution, and neither of my vid cards can do that. so I want to swap 1 card with a newer one. no vid cards are available that use the same driver as what I'm using right now. so it will be different. I don't want to replace both cards.
posting this on a older p/c my current use one today when I turned it on will start normal then go to a blank screen nothing if I start in safe mode it will come up as it should in safe mode. I have started up a couple times under repair mode but still the same just a blank screen . any one help out
thanks
This hurts the pride a bit since I'm a computer tech, but recently my wife somehow got only one of our cd-rom's views set like this:
I've tried resetting the view, I've tried going to the other views and "apply to all folders"... Nothing! It is simply seperated by alpha letters and I don't see where that's an option. She thought she clicked by the name column in the normal view to sort by name. All I know is I've never seen this in all my years as a tech... [V]
I have been trying to delete some of my saved favorits and they keep returning. I have windows xp home. I have tryed atleast 5 times to delete them and the next time I turn on the computer they reapear in my favorites again. Does anybody have any ideas as to what's causing this to happen? I did a defrag last night and backed up the registry and operation system and that didn't help either. I need some help with this. Thanks Gary
Hi, I'm getting this pop-up while in internet explorer:
Microsoft Internet Explorer
? NOTICE: IF your computer has errors in the registry database or file system, it could cause unpredictable or erratic behavior, freezes and crashes.
Fixing these errors can increase your computer's performance and prevent data loss.
Would you like to install WinFixer 2005 to check your computer for free? (Recommended)
OK Cancel
When I try to back out of this box I am sent directly to the Winfixer website. This happens all the time I have tried to get rid of it with anti-virus and anti-spyware to no avail. Is this Winfixer something I should try or stay away from. I don't trust it at all. Any suggestions or warning are appreciated.
Thanks,
Bill
I am running XP PRO operating system and my computer boots up slower than fog off of hen s---! Anyway around all the boot up crap that is slowing it down? Thanks
If I know an IP address, but don't know the website, how do I access that IP address? The reason I ask is, my firewall shows me the IP address of people who try to hack in my PC, and I would like to ping them back just to let them know I know they're trying to look in.
Wife and I are the administrators on the computer. The kids have limited accounts. One of the kids has found a way to make their "My Documents" folder invisible to us.
We can still navigate to the folder by rooting around in the C drive so it is no big deal but I am baffled as to why it won't show up for me,I can't get it to show up under "My Computer" with the rest of the "My Documents" folders.
All the accounts are set to show ALL files. Any ideas?
I've got a PC with Rambus memory in it. What's on board is Rambus (RDRAM) 184 pin PC600 (400MHz) memory boards. I want to add memory. However, I cannot find PC600 boards to add, only PC800 (800MHz) RDRAM memory. Will the PC800 memory work?
I've talked to 4-5 different companies/people and gotten 4-5 different answers. What say you?
I'm getting another computer that's the same make and model I have now. I have recovery disc but what I want to do is turn the new one into a twin with exactly the same stuff that is in this one.
Is there a way with cables or data discs to download from #1 to #2?
I use Microsoft Office 2007 (Microsoft Word and Excel). When I installed Office 2007 I was using Microsoft Works 2000 (Word Processor and Spreadsheet). I didn't know if there would be a conflict between them so I cleaned out Microsoft Works before I installed Microsoft Office.
Now I have the same problem in reverse. I have some archived files that Office 2007 can't open because they are written in Works 2000.
If I install Works 2000 with Office 2007 installed will my computer explode or what?
Im far from being computer oriented,so maybe you can help me.When Im on line I get Microsoft updates to install in my PC.They offer an up date about once a week,I usually accept and install them.But I never can tell any difference after the updates are installed.Should I accept the updates or just ignore them? Thanks in advance.
Trying to list a couple pistols on the auction side tonight.
For some reason the photos will not go from my hard-drive and load.
I get a window stating.
Some pictures ar blocked by my computer. Is it the Outlook Express or the Norton doing the blocking???
Most pictures come through but if someone forewards an email with pictures it says that they were blocked to keep someone from identifying my computer.
How do I turn this off so I can get the pictures???
unplug the power cord from the computer, plug it back in
unplug the power cord from the computer and just use it to power the monitor, to make sure the cord works & has power
if you don't hear at least a fan going in the power supply after you press the power button, it could be a bad power supply. the motherboard could be totally fried and you should still hear that.
if that ain't it, some computers go on "standby" or "hibernation" and the BIOS locks up when they go to turn on again.
next thing to try would be to get out the computer manual, find the BIOS reset jumper on the motherboard, and reset the BIOS.
last thing to try would be to remove everything connected to it, remove all pc cards inside (except video), unhook all storage devices like floppy drives, cd drives, and hard drives, see if one of those was causing a problem (but very unlikely)
Comments
My new motherboard will not have anay ide/pata cable ports so I will be in need of an adapter like the one listed below. The stats list dvd/cd-rom drives and what not; but my question is will this adapter work on and convert pata floppy drives?
http://www.newegg.com/Product/Product.aspx?Item=12-232-002&SortField=0&SummaryType=0&Pagesize=10&PurchaseMark=&SelectedRating=5&VideoOnlyMark=False&VendorMark=&IsFeedbackTab=true&Keywords=(keywords)&Page=1
I have been there before but have totally forgotten.
Thanks in advance.
"Neca eos omnes. Deus suos agnoscet."
Thanks,
Bill
I had to replace a case fan in my computer cause I heard a weird noise and determined a blade is cracked. The bummer is that is was in a tediuos metal enclosure and you had the take off and install so may hard to reach screws to replace the fan.
Long story short; I do not know if I accidently shorted out the board or if its a hard-drive problem, but when I go to start up my computer it comes to the screen that says press 'del' for setup, ctrl + z for ez flash bios etc.... When that screen appeares it just stays there for an abnormally length of time. It would only stay on that screen for 2-3 seconds at most, not it can take two to three minuters or longer to get to the WIN 7 welcome screen.
The odd thing is every function on my computer seems to be fine, just the start-up takes waaaay too long.
Did I short out a component?
Is my hard-drive to blame?
Any help is appreciated.
P.S. I have my HD split into 2 partitions, and I did a clean install of the partition where the OS is, but the same problem still occurs.
computer started runnin REALLy slow yesterday.
did all the disc clean up and defrag, closed all programs, did virus scan etc, but no luck.
today I did system restore to 1/1/09 and now everything is back to normal.
this all started when the mrs was searching for something on the internet.[B)]
anyway, is there a way to find out what is different (programs etc) between 1/1/09 and 1/7/09 so i can delete it?
thanks!
tom
BTW I am a computer idiot, so please keep it simple![:)]
I was looking at amazon dott kom and I saw vista home premium [old version]; what exactly is old version?
right now I do have 2 vid cards with a monitor on each one, everything works fine cuz they're both from the same mfr and use the same driver.
but I got this mongo 21" monitor that can do a 2048x1536 resolution, and neither of my vid cards can do that. so I want to swap 1 card with a newer one. no vid cards are available that use the same driver as what I'm using right now. so it will be different. I don't want to replace both cards.
would it work?
thanks
I've tried resetting the view, I've tried going to the other views and "apply to all folders"... Nothing! It is simply seperated by alpha letters and I don't see where that's an option. She thought she clicked by the name column in the normal view to sort by name. All I know is I've never seen this in all my years as a tech... [V]
How likely am I to burn up the graphics card if I run the computer without the fan for a couple weeks until a replacement arrives?
Thanks in advance
Microsoft Internet Explorer
? NOTICE: IF your computer has errors in the registry database or file system, it could cause unpredictable or erratic behavior, freezes and crashes.
Fixing these errors can increase your computer's performance and prevent data loss.
Would you like to install WinFixer 2005 to check your computer for free? (Recommended)
OK Cancel
When I try to back out of this box I am sent directly to the Winfixer website. This happens all the time I have tried to get rid of it with anti-virus and anti-spyware to no avail. Is this Winfixer something I should try or stay away from. I don't trust it at all. Any suggestions or warning are appreciated.
Thanks,
Bill
BNRVA@aol.comwww.vcdl.org
Measure twice, cut once.
Empty the clip!
We can still navigate to the folder by rooting around in the C drive so it is no big deal but I am baffled as to why it won't show up for me,I can't get it to show up under "My Computer" with the rest of the "My Documents" folders.
All the accounts are set to show ALL files. Any ideas?
I am not a number I am a free man
I've got a PC with Rambus memory in it. What's on board is Rambus (RDRAM) 184 pin PC600 (400MHz) memory boards. I want to add memory. However, I cannot find PC600 boards to add, only PC800 (800MHz) RDRAM memory. Will the PC800 memory work?
I've talked to 4-5 different companies/people and gotten 4-5 different answers. What say you?
FCD
"Fortes et liber"
Is a 1250W power supply too much for a computer?
In case your wondering I will be running two BDR drives, 5 120mm fans, 2 harddrives in raid array, 6 mem slots and a two way SLI video cards.
Is there a way with cables or data discs to download from #1 to #2?
Keep it simple as I'm an idiot on this stuff.
Now I have the same problem in reverse. I have some archived files that Office 2007 can't open because they are written in Works 2000.
If I install Works 2000 with Office 2007 installed will my computer explode or what?
Rugster
For some reason the photos will not go from my hard-drive and load.
I get a window stating.
"Network Error"
Connection re-set by peer"
Any clues ???
Most pictures come through but if someone forewards an email with pictures it says that they were blocked to keep someone from identifying my computer.
How do I turn this off so I can get the pictures???
unplug the power cord from the computer and just use it to power the monitor, to make sure the cord works & has power
if you don't hear at least a fan going in the power supply after you press the power button, it could be a bad power supply. the motherboard could be totally fried and you should still hear that.
if that ain't it, some computers go on "standby" or "hibernation" and the BIOS locks up when they go to turn on again.
next thing to try would be to get out the computer manual, find the BIOS reset jumper on the motherboard, and reset the BIOS.
last thing to try would be to remove everything connected to it, remove all pc cards inside (except video), unhook all storage devices like floppy drives, cd drives, and hard drives, see if one of those was causing a problem (but very unlikely)
else
you're screwed! I don't know!
John would also check the fuse in the back.
what fuse?