In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Reloading-Whats your Favorite book?

FrancFFrancF Member Posts: 35,279 ✭✭✭
edited October 2004 in General Discussion
Like Cooking for reloaders, they can vary. they have tons of recipes.

Whats your first Pick or book you grab first? Lyman, Nosler, Lee, Hornady, Sierra, Speer. Etc.

Comments

  • pack rat633pack rat633 Member Posts: 1,052 ✭✭✭✭
    edited November -1
    Year after year, its Hornady, then Nosler, as a last resort, Speer. If I'm loading lead bullets, it's always been Lyman. Top loads are generraly the same, but powder brands and types vary wildly.

    SEMPER FI MAC, SEMPER FI
  • plains scoutplains scout Member Posts: 4,563
    edited November -1
    Depends on what bullet I am loading. I go for the book that is the manufacturer of the bullet I am reloading. Then I read them all and study their ballistic charts and then go for it. I even go to the old ones as they offer loads sometimes not in the "new" ones.



    "America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
    ~Abraham Lincoln
  • James AyersJames Ayers Member Posts: 1,598 ✭✭✭✭✭
    edited November -1
    [8D] Weatherby loading manual[:p][:p][:p][:p]

    On your mark-get set- go away!!
  • cletus85cletus85 Member Posts: 2,104 ✭✭✭✭✭
    edited November -1
    I have several including Hornady, Speer, Nosler and Sierra...I generally refer to all of them in addition to the latest freebies as well as online information. I prefer my Older Speer manual for most applications.
  • IconoclastIconoclast Member Posts: 10,515 ✭✭✭
    edited November -1
    Lyman first and then others. Lyman doesn't have the depth the others offer, but neither is it wedded to a particular line of bullets / powder, so often it has some combinations one won't find elsewhere. I've always found it provided a good foundation if not the finishing touches.

    "There is nothing lower than the human race - except the french." (Mark Twain) ". . . And liberals." (me)
  • agloreaglore Member Posts: 6,012
    edited November -1
    Swift and Nosler as they are my bullets of choice.

    AlleninAlaska
    Delta Firearms & Supplies
    http://www.galleryofguns.com

    aglore@gci.net
  • TheBrassManTheBrassMan Member Posts: 3,807 ✭✭✭
    edited November -1
    VihtaVuori Oy.
    One Book/One Calibre
    Hornady
    Speer


    Nowhere in the U.S. Constitution does it state: "Seperation of Church and State".

    "Those who beat their guns into plow shares; will plow for those who don't."

    62038332.jpgawcountdown.gif

    "Isaiah 5:20 ?Woe unto them that call evil good, and good evil; that put darkness for light, and light for darkness; that put bitter for sweet, and sweet for bitter!"
  • JustCJustC Member Posts: 16,056 ✭✭✭
    edited November -1
    Nosler, then ask around, then sierra (don't understand what their barrels are doing sometimes?). Nosler usually gets me pretty dang close. Gonna try Exbal and quickload soon though.

    why chase the game when the bullet can get em from here?....
    Got Balistics?
  • rimfire72rimfire72 Member Posts: 901 ✭✭✭✭
    edited November -1
    Iconoclast has it. I always check the Lyman first.It's a good idea to check at least two different manuals to make sure. You never know when one might have a typo.It pays to be safe.
  • Ray BRay B Member Posts: 11,822
    edited November -1
    My first choice isn't a book, rather for developing a baseload to start working from, I prefer a Powley Computer (slide rule).
  • Tailgunner1954Tailgunner1954 Member Posts: 7,734 ✭✭
    edited November -1
    Nosler for specific load data (Nosler being my prefered bullet), than "Any Shot You Want" for detailed (non data) information.
    I don't shoot lead any more, but when I did I used Lyman for the data.
    Ballistics come from the program "RCBS-Load" program (also has a good data base for locating data published sources on weird/oddball cartridges).
    I have the Seirra, Speer, Hornady manuals, along with a few others, just in case.

    Whittemore
    Some guys like a mag full of lead, I still prefer one round to the head.
  • WarbirdsWarbirds Member Posts: 16,938 ✭✭✭✭
    edited November -1
    I use the lyman books for both rifle/pistol and shotgun loads.

    R/

    Dave
    th_bigclay.bmp
    How different the world would be if we could consult the veteran instead of the politician. - Henry Miller
  • shooter4shooter4 Member Posts: 4,457
    edited November -1
    Lyman 47th for pistol and rifle.

    Lyman shotshell reloading handbook for shotgun.
  • texshootertexshooter Member Posts: 1,002 ✭✭✭✭
    edited November -1
    I guess that I have all of the reloading manuals that are published.

    Nosler is usually my 1st choice on a new or unknown load as their info is good for me. Lyman #2.

    I have some old manuals that give some excellent load info, that the new books leave out.


    National Rifle Association Endowment Member-Texas State Rifle Association Life
    member

    PM Ashley 681 AF & AM, York Rite Mason
  • chuckchuck Member Posts: 4,911
    edited November -1
    Hey Ray B, where did you get your Powley Computer thing?? I have been looking for one for a long time, Lost mine several years ago.
  • PearywPearyw Member Posts: 3,699
    edited November -1
    I probably use the Lyman the most, but I cross check several others before I try anything. I load for a lot of old military rifles, so I find that the Cartridges of the World book comes in handy for data that doesn't appear anywhere else.
  • steve45steve45 Member Posts: 2,940 ✭✭✭
    edited November -1
    I have several, but I like the Speer the best.
  • FrancFFrancF Member Posts: 35,279 ✭✭✭
    edited November -1
    Wow! I was thinking to myself "I bet I am the only guy thats grabs Lyman first. I always work my loads, but with all the books I cross refrance, sometimes I will find a 5gr. diff between max and min.

    one set tells me, just say max, of 44gr of varget. Then another book has that same load as a start. Just goes to show you can't have to many books![:D]
  • Ray BRay B Member Posts: 11,822
    edited November -1
    chuck- I forget where I got it- It was mail order, but was stamped as being from Bob Hutton's in So. Cal.; It's about 20 years old and I haven't seen them offered for sale for several years. There are probably computer programs now that will do the same thing, if you can tolerate the computer thing.
  • Hunter375Hunter375 Member Posts: 612 ✭✭✭✭
    edited November -1
    Sierra for rifle, Accurate arms for magnum pistol, Speer for standard Pistol. Sierra gives the most accurate and highest velocity data for rifle, Speer gives heaviest loads for handguns, and Accurate arms lists a brutal load for my .50 AE.

    Liberal compassion inhibits progress.........think Republican and prosper!
  • chuckchuck Member Posts: 4,911
    edited November -1
    Ray B, thanks fer ans. Mine was very old also. If I ever find one fer sale I'll Get it.
  • idsman75idsman75 Member Posts: 13,398 ✭✭✭
    edited November -1
    I don't reload but I used to keep a Speer manual in the restroom for "reading material". I learned a good bit from that book and still pick it up on occasion.
  • n/an/a Member Posts: 168,427
    edited November -1
    Nosler.[:)]

    Eric

    All American Arms Company

    www.galleryofguns.com
    VIP Code: AAAC

    Veteran Owned and Operated
Sign In or Register to comment.