In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Some asked for it, pic heavy, camper reno
susie
Member Posts: 7,637 ✭✭✭✭
Ok, so here goes folks, this is what it looked like last night when I got home. When we aren't working on it, we put all the pieces/parts inside to keep from carrying everything to and from the garage. Also, have to leave room in the garage for one vehicle and the MC.
Here is the outside after we painted it:
Going in the door, you see the new carpet on the floor, the table is to the right, the stove to the left and closet straight ahead:
Stove, sink and remainder of insulation we installed:
Broken wall sconce:
New wall sconce:
Closet where I will be setting a port-a-potty for those who have an aversion to doing it like the bears do [:D]:
Looking from the back to the front:
The floor in the back where we put in new flooring and the new carpet. You can see where the flooring and cushion covers do not match:
The new back wall paneling we installed. I wasn't going for perfection or pretty, just so that it gets the job done, I'm happy. Still have to put the finishing touches around the top and side of it. This is where the bed sits and there is a fold down bunk above it.
The area that is cut out where you can see insulation is where there is a hinged door from the outside. The insulation is a rectangle that is removable if we need to access the area under the bed when we lift the little door, just wanted to make the area under the bed as airtight as possible. The water tank will be sitting on the floor under the bed.
Here is the outside after we painted it:
Going in the door, you see the new carpet on the floor, the table is to the right, the stove to the left and closet straight ahead:
Stove, sink and remainder of insulation we installed:
Broken wall sconce:
New wall sconce:
Closet where I will be setting a port-a-potty for those who have an aversion to doing it like the bears do [:D]:
Looking from the back to the front:
The floor in the back where we put in new flooring and the new carpet. You can see where the flooring and cushion covers do not match:
The new back wall paneling we installed. I wasn't going for perfection or pretty, just so that it gets the job done, I'm happy. Still have to put the finishing touches around the top and side of it. This is where the bed sits and there is a fold down bunk above it.
The area that is cut out where you can see insulation is where there is a hinged door from the outside. The insulation is a rectangle that is removable if we need to access the area under the bed when we lift the little door, just wanted to make the area under the bed as airtight as possible. The water tank will be sitting on the floor under the bed.
Comments
"Never do wrong to make a friend----or to keep one".....Robert E. Lee