In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

model 12 question

toad67toad67 Member Posts: 13,008 ✭✭✭✭
edited November 2014 in Ask the Experts
I have a Winchester model 12 that serial numbers match on the receiver and barrel. The barrel is stamped Super Speed and Super X 3 in. The receiver's action is the same size as a 2 3/4 inch model 12. Is that right for the barrel? The shotgun has ingraving on both sides of the receiver of a duck scene with heavy scrolling down the top sides of the receiver toward the barrel ending half way down the top of the barrel. The shotgun looks like it was reblued but just after it was engraved. I am going to Auction it off and I do not want to misrepresent it if it is not a 3 inch.

Comments

  • toad67toad67 Member Posts: 13,008 ✭✭✭✭
    edited November -1
    Are the ejectors on the Model 12 interchangeable between gauges? I know the receivers are different sizes, but can I use a 12 ejector in a 16?What about 20 and 28? Thanks

    Thanks. The ejector is what I was asking about. So I can use my spare 16 on the 12ga,right?
  • toad67toad67 Member Posts: 13,008 ✭✭✭✭
    edited November -1
    Having issues with a model 12 Y series. While shooting regulation trap, shells(all factory, no reloads) want to stick in the chamber. It seems like maybe the shells expand after they are fired and the chamber may be a little to tight?? Since these guns are a little different from the original 12's anything might be possible. Thoughts?
  • toad67toad67 Member Posts: 13,008 ✭✭✭✭
    edited November -1
    Should a 1940 vintage model 12 with a donut post rib and a checkered forend have a checkered butt stock or not? Thanks

    Todd
  • toad67toad67 Member Posts: 13,008 ✭✭✭✭
    edited November -1
    Isn't there a "gear" type of adjustment the allows "tightening" up the action? If so, wouldn't it be benificial to a buyer if the existing setting of this "gear" be reflected when selling the firearm?
  • toad67toad67 Member Posts: 13,008 ✭✭✭✭
    edited November -1
    I know nothing about the model 12. I'm trying to find out the value of the one i have, but there are so many that are different values. heres what i got. model 12 12 ga., nickel steel barrel,very good condition,it does have a poly choke not sure if its after market,ser. # 165428. any help on what the value is would be great. I've heard of some for 300 to 2500. thanks.


    steve
  • toad67toad67 Member Posts: 13,008 ✭✭✭✭
    edited November -1
    Today I saw a 1912 winchester, 12 guage, with straight checked grip, and an old style round, checked foreend. As I examined the inside of the slide rail for the gauge, I noticed a "T" on the rail up a few inches from the 12 for gauge. Anyone have an idea what the "T" means?
  • toad67toad67 Member Posts: 13,008 ✭✭✭✭
    edited November -1
    I have a Winchester Model 12 that was recently worked on and I'm having a problem with it. When you work the action, its really rough-not smooth at all. Also, when you "pump it" (down, then up-loading a round, although I'm testing it empty) the pump release is locked until you pull the trigger-not the way it was before. Before I disassemble it can someone tell me what to look for? By raising the loading gate I can see where the release hook locks in and can see it snap in place as the forend locks. At that point it is hard locked in place with no budging whatsoever. When I pull the trigger I can see the tension release from it and it can be pressed.

    I would really appreciate any advice/help on this. Really wanting to shoot this old girl!

    Shane
  • toad67toad67 Member Posts: 13,008 ✭✭✭✭
    edited November -1
    Asking because LGS has one within 20K serial number and it has one set up the same, except with a poly choke and donut rib.
  • CapnMidnightCapnMidnight Member Posts: 8,038 ✭✭
    edited November -1
    I'm thinking either the stock or forarm has been changed.
    W.D.
  • MG1890MG1890 Member Posts: 4,460 ✭✭
    edited November -1
    I seriously doubt that gun shipped with a checkered forend and plain stock.
Sign In or Register to comment.