scope mount ?

Winston Bode

Does anyone know what weaver bases will fit a Golden State Arms Corp. Mauser rifle. Just curious. I put a Rem. 700 front base over the front screw holes and they line up but the rear base holes did not.

Bode

BigKev72

quote:Originally posted by Winston Bode


Does anyone know what weaver bases will fit a Golden State Arms Corp. Mauser rifle. Just curious. I put a Rem. 700 front base over the front screw holes and they line up but the rear base holes did not.

Bode


Depending on who installed the scope mounts several weaver bases could possibly fit it. I would take it up a gun shop with a wide selection of bases available and just try a bunch out to find one to fit.
Sometimes when old military rifles get scoped they get parts from two different base kits or just whatever works at the time, while not exactly the way to do it, it does happen.

Try this chart out for general info [url][/url]http://www.weaver-mounts.com/charts/charts.aspx[url][/url]

It lists out the correct mounts for various Mausers. Just select Mauser in the drop down menu and browse from there.

MIKE WISKEY

if it is a m-98 mauser action it SHOULD take weaver bases # 45 & 46.

nononsense

Winston Bode,

Here is the complete list of Weaver mounts available in a pull down menu:

http://www.weaver-mounts.com/charts/charts.aspx

Here's the selection list from Brownells:

http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=18865

Best.

Winston Bode

Thanks guys,

At least now I have a place to start.

Bode

Winston Bode

Thanks again, I was able to find both the #45 and #46. The screws were too long on the the rear mount so I had to take dremel to them and shorten them just a little. The front base works fine.

Bode